Use and Care Guide

English Metric
Outer Dimensions 65 3/4“ L x 65 3/4” W x 24” H 1670 mm L x 1670 mm W x 610 mm H
Interior Dimensions
(bottom of bath) L x W (Mid) 42” L x 42” W 1067 mm L x 1067 mm W
Drain/Pump Con guration Center drain/Left end pump Center drain/Left end pump
Bath Weight (empty) 190 lbs 86 kg
Total Weight/Floor Loading 1,773 lbs 59.1 lbs/ft
2
806 kg 288 kg/m
2
Operating Gallonage (min-max) 119 (min) 148 (max) U.S. Gals 451 (min) 560 (max) L
Fuzion 6666 LH Whirlpool
Material Type: High-Gloss Acrylic
Install Type: Drop-in with wood frame or Undermount
Available Colors: White (W), Almond (A), Oyster (Y), Black (B)
Undermount Cut-out Template: DD43000; See below drop-in diagram
Standard (Included) Features:
15 jets, In-line Heater, Chromatherapy lighting, in nity edge over ow, 2
neck massaging waterfalls, 2 pillows, chrome twist and turn drain (for
alternate nishes, replace with standard parts, 1.5” drain elbow)
Available Control Systems:
J4 Luxury Control Panel (standard)
J5 Luxury LCD Control Panel
Available Upgrades:
Whisper Quiet Technology,
Illumatherapy Lighting
Available Accessories:
HB78 Optional wood frame (specify nish) 900: Un nished, 935: Wenge,
936: Teak
© 2010 Jacuzzi Luxury Bath • For additional information call Customer Service 800-288-4002 • www.jacuzzi.com/technicalspecs
HD33000 REL 03/10
*Deck width re ects only area indicated on detail.
Refer to installation instructions included with xture before beginning installation. Please con rm product availability and speci cations before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Electrical Speci cations Each component requires a separate, dedicated GCFI protected circuit
Motor/Pump 120V 20A 60HZ
Heater 120V 15A 60HZ
D095 TheraPro Jet Trim Kit (specify metal nish)
P556 AccuPro Jet Trim Kit (specify metal nish)
827: Chrome, 826: Brushed Nickel, 845: Oil Rubbed Bronze
*Note: D095 (Chrome) is standard on Illumatherapy jets.
GQ88 Light Chromatherapy Add-on Kit
DD50 Replacement Pillow (specify color) 959: White, 958: Almond,
969: Oyster
*Faucet installation note:
Selecting a faucet for rim mounting: The combined thickness at the rim
of the bathtub shell and optional wood deck is 2” (50 mm) nominal. The
length of the faucet tailpiece(s) must be long enough to extend past this
dimension and have ample clearance to assemble any hardware (i.e.
locknut, water supply ttings, etc.) necessary for installation. For under-
mount units, the combined thickness of the bathtub shell is 1/2” (12 mm)
nomial and the undermount deck should not exceed the length of the
faucet tailpiece(s), including any assembly hardware.
NOTE: Graphics May Not be to Scale
Product Codes beginning with: FUZ7260WCL
Also applies to products sold under part numbers: EH30, KS15, EH45, KS25, KS30, KS35, KS40, KS45
KEY DIMENSIONS
FEATURES, UPGRADES & ACCESSORIES
TECHNICAL SPECIFICATIONS
Drain/Over ow
Side View
End View
Letter Description English Metric
L Outer Length 65 3/4” 1670 mm
W Outer Width 65 3/4” 1670 mm
H Overall Height** 24” 610 mm
A Over ow Height 16 13/16” 427 mm
B Long Edge to Drain Center 12 1/8” 308 mm
C Short Edge to Drain Center 40 15/16” 1039 mm
D Drain Shoe Length 9 1/4” 234 mm
E Deck Height** 4” 102 mm
F Deck Width* 3 1/2” 89 mm
G Service Access Dimensions 12” H x 18” L 305 mm x 457 mm
I Floor Cut-out for Drain 20” x 4” 508 mm x 102 mm
(Motor)
E
L
A
D
B
W
H**
(Heater)
(Motor)
W
L
C
I
F
3”
Motor
(G) Service
Access
Over ow Heater
Control Panel
Suction
Fitting
**Height of tub only, optional wood
frame adds 1.25”
Drop-In Cutout
11 1/2"
31 9/16"
63 3/4"
45 1/2"
C
L
63 3/4"
Note: Drain included.
Non-standard installation,
refer to manual.

Summary of content (1 pages)