Use and Care Guide

English Metric
Outer Dimensions 72” L x 42” W x 24” H 1829 mm L x 1067 mm W x 610 mm H
Interior Dimensions
(bottom of bath) L x W (Mid) x W (End) 46” L x 27” W x 27” W 1168 mm L x 686 mm W x 686 mm W
Drain/Pump Conguration Center drain/Right end pump Center drain/Right end pump
Bath Weight (empty) 174 lbs 79 kg
Total Weight/Floor Loading 1,324 lbs 63 lbs/ft
2
602 kg 307 kg/m
2
Operating Gallonage (min-max) 82 (min) 108 (max) U.S. Gals 311 (min) 409 (max) L
Fuzion 7242 Whirlpool
Material Type: High-Gloss Acrylic
Install Type: Drop-in with wood frame or Undermount
Available Colors: White (W), Almond (A), Oyster (Y), Black (B)
Cut-out: 70” x 40” or Undermount Template GR23000
Standard (Included) Features:
11 jets, In-line Heater, Chromatherapy lighting, innity edge overow, 2
pillows, 2 neck massaging waterfalls, chrome twist and turn drain (for
alternate nishes, replace with standard parts 1.5” drain elbow)
Available Control Systems:
J4 Luxury Control Panel (standard)
J5 Luxury LCD Control Panel
Available Upgrades:
Whisper Quiet Technology,
Illumatherapy Lighting
Available Accessories:
GU05 Optional wood frame (specify nish) 900: Unnished, 935: Wenge,
936: Teak
© 2010 Jacuzzi Luxury Bath • For additional information call Customer Service 800-288-4002 • www.jacuzzi.com/technicalspecs
HD28000 REL 03/10
*Deck width reects only area indicated on detail.
Refer to installation instructions included with xture before beginning installation. Please conrm product availability and specications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Electrical Specications Each component requires a separate, dedicated GCFI protected circuit
Motor/Pump 120V 20A 60HZ
Heater 120V 15A 60HZ
GU44 TheraPro Jet Trim Kit (specify metal nish)
827: Chrome, 826: Brushed Nickel, 845: Oil Rubbed Bronze
*Note: GU44 (Chrome) is standard on Illumatherapy jets.
GQ88 Light Chromatherapy Add-on Kit
DD50 Replacement Pillow (specify color) 959: White, 958: Almond,
969: Oyster
*Faucet installation note:
Selecting a faucet for rim mounting: The combined thickness at the rim
of the bathtub shell and optional wood deck is 2” (50 mm) nominal. The
length of the faucet tailpiece(s) must be long enough to extend past this
dimension and have ample clearance to assemble any hardware (i.e.
locknut, water supply ttings, etc.) necessary for installation. For under-
mount units, the combined thickness of the bathtub shell is 1/2” (12 mm)
nomial and the undermount deck should not exceed the length of the
faucet tailpiece(s), including any assembly hardware.
NOTE: Graphics May Not be to Scale
Product Codes beginning with: FUZ7242WCR
Also applies to products sold under part numbers: GL30, KM15, GL40, KM25, KM30, KM35, KM40, KM45
KEY DIMENSIONS
FEATURES, UPGRADES & ACCESSORIES
TECHNICAL SPECIFICATIONS
Drain/Overow
Side View
End View
Letter Description English Metric
L Outer Length 72” 1829 mm
W Outer Width 42” 1067 mm
H Overall Height** 24” 610 mm
A Overow Height 17” 432 mm
B Long Edge to Drain Center 10 1/4” 260 mm
C Short Edge to Drain Center 36” 915 mm
D Drain Shoe Length 8 1/2” 216 mm
E Deck Height** 4” 102 mm
F Deck Width* 3 1/2” 89 mm
G Service Access Dimensions 12” H x 18” L 305 mm x 457 mm
I Floor Cut-out for Drain 18 1/2” x 4” 470 mm x 102 mm
(Heater)
(Motor)
L
E
W
H**
(Motor)
A
D
B
W
L
I
3”
Suction
Fitting
Motor
(G) Service
Access
F
C
HeaterOverow
Control
Panel
Note: Drain included. Non-standard
installation, refer to manual.
**Height of tub only, optional wood frame adds 1.25”
1½”