Use and Care Guide

© 2008 Jacuzzi Luxury Bath • For additional information call Customer Service 800-288-4002 • www.jacuzzi.com
© 2008 Jacuzzi Luxury Bath • For additional information call Customer Service 800-288-4002 • www.jacuzzi.com
© 2008 Jacuzzi Luxury Bath • For additional information call Customer Service 800-288-4002 • www.jacuzzi.com
INSTALLATION NOTES
Refer to installation instructions included with xture before
beginning installation. Please conrm product availability and
specications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT
TO CHANGE WITHOUT NOTICE.
Fuzion™ 7260
WHIRLPOOL BATH UNDERMOUNT, SINGLE
WITH CHROMATHERAPY
EG40 Fuzion™ 7260 Whirlpool UM—Single Left-hand motor
EG10 Fuzion™ 7260 Whirlpool UM—Single Right-hand motor
Fuzion™ 7260
WHIRLPOOL BATH UNDERMOUNT, SINGLE
WITH ILLUMATHERAPY
EG55 Fuzion™ 7260 Whirlpool UM—Single Left-hand motor
EG25 Fuzion™ 7260 Whirlpool UM—Single Right-hand motor
• Center Drain Location
• Drain and Overow supplied
• Accessories / Hardware:
Optional wood frame in teak or wenge nish #GU08
TheraPro™ Jet Rings Kit: #D095
AccuPro™ Jet Rings Kit: #P556 (6 required)
• Trim Kit Finishes Available:
(827) – Chrome
(898) – Brushed Chrome
(815) – Satin Nickel
(829) – Bright Brass
(805) – Platinum
(826) – Brushed Nickel
(845) – Oil Rubbed Bronze
Product Shown: Fuzion™ 7260 Whirlpool
Bath Undermount with Illumatherapy
Single Right Hand Motor Model: EG25
* Measurements inside unit represent cutout
in oor to allow for drain/overow. Minimum
Service Access dimensions given.
Technical Specifications
DIMENSIONS
72” L x 60” W x 211⁄2” H
(1829 mm) L x (1524 mm) W x (546 mm) H
DRAIN/OVERFLOW
A: 16-3/4” (425 mm) B: 12-1/16” (306 mm)
CUTOUT
Template provided. PN: DD44000
OPTIONAL DIY (DO-IT-YOURSELF) FRAME
Drawing provided. PN: DE56000
(Drawing comes with tub. Additional copies can be requested.)
TOTAL WEIGHT
1730 lb. (785 kg) / 57.6 lb/ft2 (281 kg/m2)
OPERATING GALLONAGE
129 U.S. Gal. (488 Liters)
PRODUCT WEIGHT
199 lb. (90 kg)
SKIRT MOUNTING
Not Available
ELECTRICAL SPECIFICATIONS
Requires a dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 20 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
HEATER (STANDARD)
RapidHeat™: P/N S750000
Faucet Installation Note:
The combined thickness of the tub shell and optional frame is 1.75.
Care should be taken to select a faucet that will accomodate
this thickness.
Motor
Heater (S)
72"
60"
36"
24.19"
12"
8.47"
18-1/2" x 4"
12" H x 18" L
Service Access
(Motor 1)
(Heater)
B
A
L
H
W
4" (102 mm)
END VIEW SIDE VIEW DRAIN OVERFLOW

Summary of content (1 pages)