COMFORT PLUS WHIRLPOOL BATH SERIES INSTALLATION AND OPERATION INSTRUCTIONS Jacuzzi® Luxury Bath 14525 Monte Vista Avenue Chino, CA 91710 1-800-288-4002 www.jacuzzi.
English Comfort PLUS Whirlpool Bath Page 2 www.jacuzzi.
Comfort PLUS Whirlpool Bath Contents........................................................................................................................................................................... 3 Product Information.......................................................................................................................................................... 3 Safety Instructions...........................................................................................................
Comfort PLUS Whirlpool Bath English Safety Instructions INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS. This is a professional grade product. A knowledge of construction techniques, plumbing and electrical installation according to codes are required for proper installation and user satisfaction. We recommend that a licensed contractor perform the installation of all Jacuzzi® Luxury Bath products. Our warranty does not cover improper installation related problems.
Comfort PLUS Whirlpool Bath WARNING: Do not operate this unit without the guard over the intake for the circulation pump (suction cover/strainer). Caution: This equipment is intended for indoor use only. Install the equipment in accordance with these instructions. Use supply wires that are suitable for 167°F (75°C), including the temperature rating of the supply conductors to be used.
Comfort PLUS Whirlpool Bath English Operational Safety Instructions WARNING: Risk of hyperthermia and possible drowning! Do not use a hydromassage bathtub equipped with a heater immediately following strenuous exercise. WARNING: Risk of electrical shock! • Do not operate hydromassage system unless the bath is filled with water to at least 1-2˝ (25-51 mm) above the highest jet. • Do not immerse the control panel by overfilling the bath.
Comfort PLUS Whirlpool Bath Warning: The use of alcohol, drugs or medication can greatly increase the risk of fatal hyperthermia. People using medications or having an adverse medical history should consult a physician before using a hydromassage bathtub equipped with a heater. Warning: Do not tamper with user-operated controls or such devices. Warning: Use this unit only for its intended use as described in this manual.
Comfort PLUS Whirlpool Bath Inspection and Testing English Visual Inspection 1 Remove the bathtub from the shipping carton. Be careful not to scratch the surface of the bathtub on exposed staples. Remove the staples or fold them into the carton. Retain the carton until satisfactory inspection of the product has been made. Do not lift the bathtub by the plumbing at any time; handle by the shell only. 2 Inspect the shell and bathtub components.
Comfort PLUS Whirlpool Bath Subfloor 1 The drain/overflow of the bathtub extends below the bottom of the bathtub. Identify the drawing in the Technical Specifications Manual that corresponds with your bathtub. 2 Make appropriate cuts to the subfloor to accommodate the drain. 3 Jacuzzi’s Tru-Level™ base is a standard feature on all bathtubs. If the subfloor is level and a continuous surface, no other preparation is necessary. Proceed to the “Installation” section.
English Comfort PLUS Whirlpool Bath Reference Illustrations J2 Control Panel Schematic Diagram These illustrations are for reference only, as the unit comes fully assembled. Risk of electric shock. Before servicing these connections, disconnect all power supply cables to both 120VAC services. 120VAC 15A GFCI PUMP/MOTOR CONTROL PANEL CONTROL BOX CHROMATHERAPY LIGHT Figure 3 CANADIAN MODELS ONLY: The components must be hardwired in the J-Boxes (supplied) that are located on the unit. Page 10 www.
Comfort PLUS Whirlpool Bath Before you begin your installation, please read the following: Observe all local and building codes. Determine which tools will be used during the installation. Additional bathtub drain parts and plumbing are commercially available at plumbing and hardware stores. Drain/Overflow rough-in information is included with your bathtub in the installation instruction manual. • • • • Tile Complete the bathtub surround installation.
Comfort PLUS Whirlpool Bath English Drop-in Installation (con’t) 10 Inspect all fittings, plumbing, and control lines after inserting to insure the components are not damaged, disconnected, or contacting the finish surface substrate or support members. 11 Align the bathtub and connect the drain. 12 Turn on the power supply to the dedicated GFCI protected circuits and check system operation. 13 Caulk around the perimeter of bathtub to seal the space between the rim and the finished deck.
Comfort PLUS Whirlpool Bath Screw skirt flanges into wall studs. 1 Finishing Materials It may be necessary to shim the unit to close any gaps between wall studs and the flanges. 2 Complete finish work over skirt flange. 3 Caulk around the perimeter of the skirt to seal the space between the skirt and the finished deck.
Comfort PLUS Whirlpool Bath English Cleanup To avoid dulling and scratching the surface of the bathtub, never use abrasive cleaners. For most soiled surfaces, a mild liquid detergent and warm water is sufficient. The following is also recommended: Remove spilled plaster with a wood or plastic edge. Spots left by plaster or grout can be removed if lightly rubbed with detergent on a damp cloth or sponge.
Comfort PLUS Whirlpool Bath Colored Lighting Operation The colored lighting default is constant blue. Pressing the ( ) button activates color scroll in this order: blue, teal, green, yellow, orange, red, pink, purple and then returns to blue and continuously repeats. To stop on a selected color, press the ( ) button again. Pressing the ( ) button activates color scroll in this order: blue, purple, pink, red, orange, yellow, green, teal and then returns to blue and continuously repeats.
Comfort PLUS Whirlpool Bath Bathtub Additives English Do not use oil or oil-based bathtub additives. If you want to use any kind of bathtub additive, use only a small amount of low-foaming powder or crystal substance; the whirlpool action intensifies the foaming properties of soaps. The use of certain bathtub oils, bubble baths, and bathtub additives may increase the level of accumulations of bathtub residue in the whirlpool system and may cause false reading of the water level sensors.
Comfort PLUS Whirlpool Bath Suction Cover/Strainer Maintenance Clean the suction cover/strainer of hair and debris when necessary. Remove the center screw and detach the suction cover. 2 Clean the cover by backflushing debris from the holes. 3 Replace the suction cover immediately after cleaning. English 1 Suction Fitting Suction Cover When reinstalling, orient the cover/strainer with the small notch at the bottom.
Comfort PLUS Whirlpool Bath Technical Specifications Rectangular Baths English L W 2" (51 mm) H (Heater) SIDE VIEW (Motor) L (25 mm) 1" (Heater) SIDE VIEW A END VIEW B W DRAIN/OVERFLOW H (Motor) END VIEW SPECIFICATIONS (Rectangular) LH=Left Hand MTR, RH=Right Hand MTR, LBM=Left Back MTR, LFM=Left Front MTR, RBM=Right Back MTR, RFM= Right Front MTR MODEL Amiga™ PLUS LH, RH, RBM, RFM, LBM, LFM DIMENSIONS DRAIN/OVERFLOW DIMENSIONS 72" (1829 mm) L* 16-7/8" (429 mm) A (356 mm) B 36" ( 914 m
Comfort PLUS Whirlpool Bath Oval Baths L 2" (51 mm) (Heater) H (Motor) SIDE VIEW A END VIEW B LUNA PLUS DRAIN/OVERFLOW 66" 38" 2" (51 mm) 19 1/2" (Heater) SIDE VIEW SIDE VIEW RIVA® 5.5 PLUS L 72" W 2" (50.8 mm) H (Motor) 19" 2" (51 mm) (Motor) END VIEW RIVA® 5.
Comfort PLUS Whirlpool Bath English Corner Baths 2” (50,8 mm) (Motor) H 1" H (25 mm) (Suction Heater) END VIEW SIDE VIEW FRONT VIEW CAPELLA™ PLUS LEFT HAND MOTOR SIDE VIEW CAPELLA 60 WITH INTEGRAL SKIRT L L H 2” (51 mm) (Motor) (Suction Heater) 2” (51 mm) (Suction Heater) END VIEW SIDE VIEW END VIEW SIDE VIEW (Motor) H TARA™ PLUS Right-hand BACK MOTOR TARA™ PLUS Left-Hand BACK MOTOR 1” (25,4 mm) L H 2” (51 mm) (Suction Heater) H (Suction Heater) (Motor) (Motor) END VIEW
Comfort PLUS Whirlpool Bath Roughing-In Reference - Rectangular 36'' Heater 2'' Opt. Service 14'' Access AMIGA™ PLUS, Left Hand Motor 18'' 16'' x 4''* 36'' 11-1/8'' 14'' Heater 2'' Heater 2'' Opt. Service Access Motor 14'' Heater Opt. Service Access 2'' 36" Motor Heater 18" 5-3/4" 32" Heater 16" 2" 9" CETRA™ 532 PLUS, Right Hand (Left back motor right-hand tub.
Comfort PLUS Whirlpool Bath Heater 2" 12" H x 18"L Service Access Motor 12" H x 18" L Service Access 14" x 4" 6-7/8" 8-1/2" Motor *60" *72" 21" Motor 12" NOVA™ 6 PLUS, Left Hand 4-1/4" 5" 30" SIGNA™ 5, Left Hand 21" 42" Heater 42" 13" x 5" Motor 5" Opt. Service Access NOVA™ 6 PLUS, Right Hand 6-7/8" 8-1/2" 4-1/4" 12" H x 18" L Service Access Opt. Service Access NOVA™ 5 PLUS, Left Hand *60" 21" 11" x 4" Motor Heater 42" 2'' Opt. Service Access 30" Opt.
Comfort PLUS Whirlpool Bath 72" 62" 21-1/2" 21" 12" x 4" 14" x 4" Motor Heater 43" Motor Heater 5" 9-1/2" 2" 62" 72" 21-1/2" 12" x 4" 5" 9-1/2" 2" GALLERY™ 5 PLUS, Right Hand 6-7/8" 2" 11-1/2" GALLERY™ 6 PLUS, Right Hand 72" 62" 21-1/2" 13" x 6"* 3" 36" 14" x 4" 43" Motor Heater 6-7/8" 5" LUNA®PLUS, Left Hand 12" H x 18" L Service Access 2" 2" 12" H x 18" L Service Access 11-1/2" RIVA™ 6 PLUS, Left Hand 66" 62" 21-1/2" Motor Heater 42" 43" 12" x 4" Heater 5" LUNA® PLUS,
Comfort PLUS Whirlpool Bath English Roughing-In Reference - Corner Opt. Service Access 33-1/2" 60" 60" 59-1/8" (1502 mm) Ref. Motor Heater 14" X 4" Service Access 27" 27" 34-15/16" 46-5/8" 43-1/8" 6" Drain Cutout 60" 60" CAPELLA™ 60 PLUS, Left Hand CUTOUT Opt. Service Access Motor Heater 14" X 4" Service Access 27" 59-1/8" (1502 mm) Ref. 27" 34-15/16" 46-5/8" 58" (1473 mm) Drain Cutout 43-1/8" CUTOUT 60" 60" 61-5/8" Ref.
Comfort PLUS Whirlpool Bath Roughing-In Reference - Corner Service Access 60" 61-5/8" Ref. 58" (1473 mm) 14" x 4"* Heater Motor 27-1/4" Motor Drain Cutout 35" 44" 46" Opt. Service Access Heater 25-1/2" (648 mm) 25-1/2" (648 mm) 45-9/16" (1157 mm) - 2" x 4" Stud TARA™PLUS, Right Hand TARA PLUS RH CUTOUT 60" 12" H x 24"L Service Access 60" 61-5/8" Ref. 14" x 4"* Heater (S) Opt. Service Access 58" (1473 mm) Motor 59" Ref.
Comfort PLUS Whirlpool Bath English Authorized Service If you need a referral for a service company near you, or need assistance with operation or maintenance-related questions, please call our Service Support Department at 1-800-288-4002. Visit our web site at http://www.jacuzzi.com/ for products, services, and an online copy of these Installation and Operation Instructions. When requesting service or technical assistance please have available both the model and serial number of your unit.
Limited Lifetime Warranty on Jacuzzi Luxury Branded Baths for the Comfort, Comfort Plus, Warranty Pure Air®, Luxury, Salon™ Spa, and Pure Air® II Collections Comfort PLUS Whirlpool Bath Jacuzzi Luxury Bath (the “Company”) offers the following expressed limited lifetime warranty to the original purchaser of any Jacuzzi® Luxury Bath products provided in the Company’s Comfort, Comfort Plus, Pure Air®, Pure Air® II, and Luxury™ collections ("Bath") who purchases the Bath for personal or single family resident
English RETURN OF WARRANTY REGISTRATION Comfort PLUS Whirlpool Bath To register your product, please go to our web-site Jacuzzi.com, click on Bath and Showers, then select ONLINE WARRANTY REGISTRATION from the top of the page. You will then be prompted to enter your product Serial Number followed by your warranty registration information. Or you may also register by completing the registration below and mailing it to jacuzzi at the address provided below.
