Manual

Page 37
J-400 Series
When a programmed filter/heating cycle activates, the LCD screen displays the
following message:
1*
At any time, you may check the programming of any aspect of any filter/heating
cycle by first pressing CYCLE button then moving through the menu by
pressing either CYCLE or SELECT button. The programming is
changed only by pressing WARMER or COOLER buttons during this
process.
11.3 Adjusting Time of Day
The Sentry control system remembers the time of day even in the event of a
prolonged power outage. However, it may occasionally be necessary to reset the
time of day. For example: if you are not in the Pacific Time Zone you will want
to reset the time for your own time zone. (The system will automatically adjust
to and from daylight savings time.) To accomplish this, press DISPLAY ,
MODE and DISPLAY buttons within five seconds each. A number
representing the hour will be displayed, followed by AM or PM. The hour will
advance or decrease each time WARMER or COOLER button is
pressed within five seconds. Then, press DISPLAY button again to display
the minutes. Adjust the minutes as necessary by pressing WARMER or
COOLER button. After 5 seconds, the display will return to normal and
save your settings.
11.4 Main Control Panel Lock
To help prevent unauthorized use of your spa, the Sentry controls incorporate a
unique panel locking system which disables the controls on the panel.
• To Lock The Main Control Panel: Press DISPLAY ,
MODE , and WARMER buttons within five seconds
each. A padlock symbol will appear on the LCD screen. With the
panel locked, all components are disabled from modifications and the only
settings that can be adjusted are the standard and economy filter/heating
modes and time of day. All automatic spa functions will operate normally.
• To Unlock Main Control Panel: Press DISPLAY , MODE
, and COOLER buttons within five seconds. The “lock”
symbol will disappear. All buttons are now active.
*Note: Number will vary
according to which filter
cycle is being programmed.
*Note: Number will vary
according to which filter
cycle is being programmed.
LOCKEDLOCKED
LOCKEDLOCKED