Bonaire™ Shower with Seat INSTALLATION INSTRUCTIONS
WARNING: Never operate electrical appliances (hairdryer, telephone, television, radio etc.) inside or within 5 feet of the unit. Note: This is a professional grade product. A good knowledge of construction techniques and plumbing installation according to codes are required for proper installation and user satisfaction. We recommend that a licensed contractor perform the installation of all Jacuzzi Whirlpool Bath products. Our warranty does not cover improper installation related problems.
SPECIFICATIONS 32'' 60'' 24'' 84-1/2'' 36'' 24-1/2'' 9-1/8'' (DRAIN) 18.5" END VIEW SIDE VIEW DIMENSIONS 60" (1524 mm) L 32" ( 813 mm) W 84-1/2" (2146 mm) H TOTAL WEIGHT/ FLOOR LOADING 346 lb/(157 kg) 45 lbs./sq. ft./(220 kg/sq. m) PRODUCT WEIGHT 146 lb (66 kg) Product specifications are subject to change without notice. Use liquid detergent to maintain bright, smooth surface. Do not use abrasive household cleaners.
Important: Read complete instructions before beginning installation. Remove the shower from the carton. Retain the shipping carton until satisfactory inspection of the product has been made. Immediately upon receipt, inspect the shell before installing. Should inspection reveal any damage or defect in the finish, do not install the shower. Damage or defect to the finish claimed after the shower is installed is excluded from the warranty.
Framing and Support The drain/overflow of the bath extends below the bottom of the shower base. Note that this requires a cutout in the floor. The floor structure beneath the bath must be able to support a total weight of base and bather. Refer to the specifications under total weight for your model. The unit must be supported from the bottom of the bath and not from the tile flange. If the subfloor is level, no other preparation is necessary. You can proceed to install the bath.
Drain Information. NOTE: Watertight installation of the drain is the installer's responsibility. Any occurrence of drain leakage is excluded from the Jacuzzi Whirlpool Bath warranty coverage of this product. TIGHTEN SEALING NUT CAUTION: A nonflammable protective barrier must be placed between soldering work and shower unit to avoid possible damage to the bath.
Jacuzzi Whirlpool Bath Limited Warranty Shower System Product WARRANTY COVERAGE Jacuzzi Whirlpool Bath (the “Company”) offers the following express limited warranty to the original purchaser of any Jacuzzi Whirlpool Bath Shower System product (“unit”) who purchases the product for personal or single family use (“user”). The Company will repair or replace, at its option, the unit or its equipment in accordance with the following terms and conditions.
RESPONSIBILITIES OF OTHERS Inspecting the unit prior to installation is the responsibility of the installer or building contractor who acts on behalf of the user. They are responsible for ensuring the unit is free of defect or damage. Notices are placed on and in the unit and on the shipping carton advising the installer of this responsibility. In the event of a problem, the unit must not be installed.