Installation Sheet

CAB 129 R06
1
Aluminum Cabinet
Thank you for purchasing the Jacuzzi® Aluminum Cabinet. Please follow the installation and care guide to
ensure your aluminum cabinet is tted safely and retains its high quality nish.
Please retain this leaet for future reference.
This installation guide applies to the following cabinets:
PD500000 - Aluminum Recessed & Surface Mounted Tri-View Cabinet 48” x 31”
Tools required - not supplied
SURFACE MOUNTED
Pencil; Tape Measure; Philips Screwdriver; Flat Head Screwdriver; Adjustable Wrench ; Drill; 5/16” Drill Bit,
27/64” Drill Bit; (Ceramic drill bit optional).
RECESSED MOUNTED
Pencil;Tape Measure; Level; Hole Saw; Saw; Screwdriver; Stud and Power Cable Detector.
KEEP ALL TOOLS OUT OF THE REACH OF CHILDREN
THIS CABINET IS VERY HEAVY. WHEN SURFACE MOUNTING THIS CABINET ON WALLS ENSURE
THE MOUNTING BRACKETS ARE SECURELY SCREWED INTO THE STUDS.
Home Safety Advice
- Two people must install this product to ensure that it is installed safely.
- Always take care when using power tools, particularly in the bathroom.
- Always check for hidden cables and pipework before drilling and take extreme care if there is any
water in the working area.
- Always wear suitable eye protection when drilling.
- If the product is to be tted on a ceramic tiled wall, a ceramic drill bit should be used.
- Always ensure that the drill hole passes through the central tiled area rather than through the grouted
area. To prevent damage to the tile, mask the area around the hole with tape before drilling.
- Do not strike the product with hard or sharp objects.
Product Care
To retain the best quality nish, clean product regularly with a soft damp cloth.
Do not use abrasive or chemical cleaners as these will damage the product.
EN
PD50000

Summary of content (17 pages)