Installation Guide
Shower Base Installation And Operation www.jacuzzi.com Page 7
English
Clean Up After Installation
• The acrylic nish will give long-lasting beauty when properly maintained. To avoid dulling and scratching of the nish, never
use abrasive cleaners or harsh chemicals. A mild liquid detergent and warm water will clean soiled surfaces.
• Remove spilled plaster with a wood or plastic edge. Metal tools will scratch the surface. Spots left by plaster or grout can be
removed if lightly rubbed with a mild detergent and a damp cloth or sponge.
• Minor scratches that do not penetrate the color nish can be removed by lightly sanding the surface with a 600-grit,
wet-dry sandpaper. To restore the glossy nish, use a special compound like Meguiar’s No. 10 Mirror Glaze. If it is not
available, use an automotive rubbing compound followed by an application of automotive paste wax.
• Major scratches and gouges that penetrate the acrylic surface may require renishing. Ask your Jacuzzi Luxury Bath
dealer for special instructions.
Specications Subject To Change Without Notice
Jacuzzi
Luxury Bath has obtained applicable code (standards) listings generally available on a national basis for products of this
type. It is the responsibility of the installer/owner to determine specic local code compliance prior to installation of the product.
Jacuzzi
Luxury Bath makes no representation or warranty regarding, and will not be responsible for any code compliance.