User's Manual

MERCURY 3 RFID READER INSTALLATION AND SERVICE GUIDE (8200-0222-01, REV. 1/A)
9 of 9
Specifications
Electrical
RFID Reader
UHF operating frequency ...................902–928MHz
HF operating frequency ...........................13.56MHz
Input voltage .........................................15Vdc, 3.0A
Separate Power Supply
Input voltage .......... Nominal 100–240Vac, 50/60Hz
Ac line current....................... Nominal 0.5A at 120V
Output voltage ...............Nominal 15Vdc, 4.2A peak
certified limited power source
Class 2
Environmental
Operating temperature: ... 0° to 40°C (32° to 104°F)
Relative humidity: ........... 0 to 90% non-condensing
Mechanical
Length ........................................... 26.5cm (10.4 in.)
Width............................................. 26.6cm (10.4 in.)
Width (including mounting bracket) . 30.5cm (12 in.)
Height ............................................... 3.8cm (1.5 in.)
Weight.................................................. 1.4kg (3 lbs)
Supported Tag Protocols
915 MHz (Alien EPC)
13.56 MHz (Philips I-Code 2, ISO 15693)
Declarations
Regulatory Compliance
EMC ..............................47 CFR, Part 15
Safety ............................UL 60950
Can/CSA C22.2 No 60950
REGULATORY PRODUCT NAME: RFID TM1
FCC COMPLIANCE: This equipment complies with Part 15
of the FCC rules for intentional radiators and Class A digital
devices when installed and used in accordance with the
instruction manual. Following these rules provides reasonable
protection against harmful interference from equipment
operated in a commercial area. This equipment should not be
installed in a residential space as it can radiate radio frequency
energy that could interfere with radio communications, a
situation the user would have to fix at their own expense.
EQUIPMENT MODIFICATION CAUTION: Equipment
changes or modifications not expressly approved by
ThingMagic LLC, the party responsible for FCC compliance,
could void the user's authority to operate the equipment and
could create a hazardous condition.
IMPORTANT USER INFORMATION: In order to comply
with FCC requirements for RF exposure safety, a separation
distance of at least 22 cm (8.7in.) needs to be maintained
between the radiating elements of the antenna and the bodies
of nearby persons.
Other Declarations
WARRANTY DISCLAIMER: ThingMagic LLC makes no
representation or warranty with respect to the contents hereof
and specifically disclaims any implied warranties of
merchantability or fitness for any particular purpose. Further,
ThingMagic LLC reserves the right to revise this publication
and make changes from time to time in the content hereof
without obligation of ThingMagic LLC to notify any person of
such revision or changes.
LIMITED RIGHTS NOTICE: For units of the Department
of Defense, all documentation and manuals were developed at
private expense and no part of it was developed using
Government Funds. The restrictions governing the use and
disclosure of technical data marked with this legend are set
forth in the definition of “limited rights” in paragraph (a) (15)
of the clause of DFARS 252.227.7013. Unpublished - rights
reserved under the Copyright Laws of the United States.
TRADEMARK NOTICE: ThingMagic and the ThingMagic
logo are trademarks or registered trademarks of ThingMagic
LLC. Other product names mentioned herein may be
trademarks or registered trademarks of ThingMagic or other
companies.
No part of this guide may be reproduced in any form without
written permission from ThingMagic LLC.