User Manual

Tel: [phone]
Fax: [phone]
2 Hamelacha St., Poleg Industrial Zone, Natanya ,P.O.B 8249, ZIP 42504 Israel
LogiTag Systems LTD. www.logi-tag.com
Page
7/12
Led status table:
2.2 Power Supply Connection
• Allowed supply voltage: 5V +/-5%, 3A .Use only certified unit.
• System's DC supply connector: male jack size 3.8*1.3mm.
• Use of higher supply voltage can damage the system!!
• Use only certified class B, LPS power supply device.
• While charging the battery or when adaptor connects to the
system do not use it or link to host.
2.3 USB connection for battery charging
Connect to standard USB host that can supply minimum current of
500mA.
2.4 Bluetooth interface
• Standard BT interface, port settings:
• baud rate 115200b/s
• data bits=8
• parity=none
• stop bit=1
• flow control=none
Led type and
color
Led
mode
Device status
on
either USB cable or adaptor connect to the
device and battery fooly charged
blinking
either USB cable or adaptor connect to the
device and battery is charging
blinking
fast
during system power up by pressing the button
PWR - red
off
device powered of internal battery
off
either USB cable or adaptor connect to the
device
on
device powered of internal battery, PWR led is off
BAT - green
blinking
battery need to be charged
BT - blue on
Bloutooth connection established
RFID - yellow on
device identifies transponder