Users Manual VP4910
FCC Certification This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a CLASS B digital device, pursuant to Part 15 of the FCC rules.
Introduction Overview Congratulations on your purchase of the VP4910 RemotePoint™ Jade Green Laser Presentation Remote. The VP4910 offers full 360o mouse control with patented click-trigger support, programmable buttons, and the brightest laser in its class.
Installation Adding or Changing Batteries Open the battery compartment by pressing down on the latch. Insert the batteries per the diagram on the remote. Standard AA alkaline batteries are recommended. Use the Receiver Directly The receiver can also be plugged directly into any free USB port on your computer or laptop for immediate use.
Pairing the Receiver The receiver and remote come pre-paired at the factory. The remote will automatically adjust frequencies and channels to ensure reliable communication. Should you have any problem with communication, you can re-pair them by plugging the USB receiver into the AutoRF Port on the back of the remote.
Familiarizing Yourself with the Controls Navigation Ring Laser Prev Slide Right Click Next Slide 360o Mouse Button 1 Button 2 Button 3 Button 4 Auto RF Pairing Port Page 4 Click Trigger Left Click
Default Control Mouse Control Move the 360 degree mouse by moving the mouse button in the center of the navigation ring in the direction you wish to move. Left Click: Use the button on the Click-TriggerTM on the bottom of the remote. Right Click: Use the bottom button on the navigation ring to right click.
Using the Laser Pointer Press the button on the top of the ring to activate the laser pointer. The laser pointer can be used to highlight important points on slides and graphs. Because the laser emits a green beam it will appear much brighter than a standard laser beam. Using the Base Station For permanent installations, the VP4910 comes with an optional base station. To use the base station, plug the USB cable into the USB port on your computer.
Custom Programming VP4910 Remote The four buttons on the bottom of the VP4910 can be programmed to send a wide variety of keystrokes. The software is available online at http://www.smklink.com/support/downloads.html The remote can also be programmed to meet your own needs. To change the functions of the remote, select individual keys from the drop down menu. Once you have made your selection click “Program Receiver.” One programmed, the changes are written to nonvolatile memory on the receiver.
Product Specifications Laser: Range: Frequency: Features: Battery Type: Size: 532 nm Green Class II Laser 150 ft Omni-Directional Range Auto RF 64k unique addressess 2.4 GHz Radio Frequency Full 360o Mouse PowerPoint Slide Control 4 Programmable Buttons 2 x AA Batteries 38 mm (W) x 160 mm (L) x 27.
For Product Support Please Contact SMK-Link Electronics Corporation 3601-B Calle Tecate Camarillo, CA 93012 USA TEL 888 696 3500 FAX 805 987 6665 SMKLINK.
Thank You Thank you for purchasing a VP4910 RemotePoint™ Jade Green Laser Presentation Remote. We know you had other choices and we appreciate that you chose Interlink Electronics by SMK-Link for your wireless needs. So that we may better serve you in the future, please register online at www.smklink.com/register. Warranty 30-Day Money Back Guarantee One Year, Limited Warranty P/N 94-74889 Rev.