User's Manual

Table Of Contents
CONNECTING A MEDIA DEVICE
Read the manufacturer's instructions for
any device, before it is connected to the
Media system. Make sure that the device
is suitable, and comply with any
instructions regarding connection and
operation. Failure to do so may result in
damage to the vehicle’s Media system
or the media device.
Connect the device into the appropriate socket:
1.
HDMI/MHL socket.
2.
USB sockets.
3.
Rear media HDMI/MHL socket.
4.
Rear media USB sockets.
5.
Rear media HDMI socket.
Note: On vehicles fitted with Executive class
rear seats, the Rear media connection sockets
are located in the rear storage compartment in
the centre armrest. See 63, STORAGE
COMPARTMENTS.
Note: Use the cable supplied with your media
device to connect to the USB socket.
Note: High quality cables are recommended to
be used with Apple devices as this will enhance
operation.
Note: A USB hub cannot be used to connect
more than one USB device to the audio unit.
Note: Devices connected to the USB ports will
be charged, but devices that are fully discharged
will not play.
Higher-rated devices that require more than
7.5W to charge may not display an indicator
when charging; these devices will still charge
without this indicator being displayed.
Note: HDMI devices are not charged.
Note: Apple devices should be updated to the
latest iOS version, otherwise, full support cannot
be guaranteed.
Note: Voice command support can only be
guaranteed for newer Apple devices, i.e, devices
that use the lightning connector.
Note: Options, such as Repeat and Shuffle,
relate to the device currently playing; they will
not apply to any subsequent device. Previous
Repeat and Shuffle selections will be
deactivated when a new queue has been created.
Note: The available sockets vary, according to
vehicle specification.
119
Portable media
R
FOR REFERENCE ONLY
24.07.2015