User's Manual

SENSOR FAULTS
If the security systems detect a fault with one
of the security sensors, an error tone will sound
from the alarm after the vehicle is unlocked and
disarmed. If this condition occurs, please visit
your Retailer/Authorised Repairer for
rectification.
EMERGENCY LOCKING
In the event of the battery discharging or a fault
occurring with the Keyless locking system, the
doors must be locked manually.
All unlocked doors, except the driver’s door,
should be locked using the following procedure.
Finally the driver’s door should be locked via
the external door lock. See 4, UNLOCKING
THE VEHICLE.
Note: Do not leave the emergency key blade in
the vehicle at any point during the emergency
locking procedure.
1.
Open the door and locate the emergency
lock access cover. There is a small chamfer
on the back of the cover; using a finger nail,
push up and away from the door to remove
the cover.
2.
Insert the emergency key blade firmly into
the emergency lock until a click is heard.
The emergency key blade can now be
removed.
Note: The emergency key blade is stowed
in the Smart key. See 4, UNLOCKING THE
VEHICLE.
3.
Replace the emergency lock access cover
by fitting the lower clip first, then pushing
the cover until it clicks into place.
4.
Close the door and check to make sure the
door is locked.
Repeat the procedure for all other unlocked
doors.
12
Exiting the vehicle
L
FOR REFERENCE ONLY
24.07.2015