User's Manual

PARK ASSIST
Using the Parking Aid sensing technology, Park
Assist is an aid to manoeuvring the vehicle in
and out of parking spaces. Park Assist will take
control of the vehicle's steering system to
manoeuvre the vehicle.
The driver must maintain full control of
the accelerator and brake throughout the
parking manoeuvre.
Note: A Park Assist manoeuvre can be cancelled
at any point, by holding/turning the steering
wheel or by pressing the Park Assist button.
Park Assist comprises of 3 different features:
1.
Parallel parking: For reversing into a parking
space that is parallel to the vehicle.
2.
Perpendicular parking: For reversing into a
parking space that is at 90° to the vehicle.
3.
Parking exit: For exiting from a parallel
parking space.
All Park Assist instructions are displayed in the
Message centre.
Park Assist sensors may not detect
moving objects, such as children and
animals, until they are dangerously
close. Always use extreme caution
when manoeuvring and always use
your mirrors.
Park Assist is a driving aid only. It
remains the driver's responsibility to
drive with due care and attention
during parking manoeuvres.
Park Assist sensors may not detect
some obstructions, e.g., narrow posts,
small objects close to the ground,
protruding elevated objects and, in some
circumstances, bicycles or motor cycles
parked alongside the kerb.
All sensors must be kept clean and free
from debris or obstructions, e.g., leaves,
mud, snow, ice, frost or insects. Failure
to keep the sensors clean may result in
sensor miscalculation or false
indications.
Park Assist must not be used if:
• A temporary spare wheel is in use.
147
Parking features
R
FOR REFERENCE ONLY
24.07.2015