User's Manual

Note: The head restraint can only be removed
if the seat is moved forward or back to create
more space.
To remove the head restraint, adjust the angle
of the back of the seat forward or back to create
more space. Press both locking collars at the
same time and lift the restraint out of the seat.
Do not drive or carry passengers with
the head restraint removed from an
occupied seat. The absence of a
correctly adjusted head restraint
increases the risk of neck injury in the
event of a collision.
WARNING: Always store a removed
head restraint securely.
REAR HEAD RESTRAINTS
It is possible to swivel the head
restraint forwards or backwards. For
greater protection in the event of a
collision, the head restraint should be
adjusted so that it is as close to the
back of the head as is practical.
Follow the instructions for the design of head
restraint fitted to your vehicle.
1.
To raise, pull the restraint upwards, it will
click and lock in position.
2.
To lower, depress the locking collar and
push down on the restraint.
3.
To adjust the angle of the head restraint,
press the locking collar on the side of the
restraint and tilt to the desired position.
4.
To adjust the centre head restraint, tilt the
restraint forward.
5.
Raise or lower the centre head restraint as
required. The restraint can be locked in 1
of 3 height positions.
Note: Do not use the locking collars to raise or
lower the centre head restraint.
20
Head restraints
L
FOR REFERENCE ONLY
24.07.2015