User's Manual

ADJUSTING THE STEERING WHEEL
Never adjust the steering wheel while
the vehicle is moving.
Do not use steering wheel mounted
security devices. Movement of the
steering wheel in Exit and Entry mode,
could result in damage to the vehicle or
possible injury to the occupant.
The steering wheel can be adjusted for tilt and
reach as follows:
• Move the control forwards or rearwards to
adjust reach.
• Move the switch up or down to adjust tilt.
Up to 3 steering wheel positions can be stored
and recalled, along with seat and exterior mirror
positions, by the Driving position memory. See
14, DRIVING POSITION MEMORY.
ENTRY AND EXIT MODE
With the steering column adjustment control in
the AUTO position, the steering column will
move to provide easier entry and exit from the
vehicle, as follows:
• Exit: When the driver’s door is opened, the
steering column will move to the uppermost
tilt position.
• Entry: When the driver’s door is closed and
the ignition is switched on, the steering
column will return to its previously selected
driving position.
Note: If the column control is moved away from
AUTO when the column is in the Exit position,
the column will still move back to its previous
driving position when the driver’s door is closed
and the ignition is switched on.
Note: If the column is manually adjusted during
Entry or Exit operation, column movement will
stop.
HEATED STEERING WHEEL
To activate the heated steering
wheel, press the switch, see 280,
DRIVER CONTROLS. Press again to
switch off.
22
Steering wheel
L
FOR REFERENCE ONLY
24.07.2015