User's Manual

STARTING THE ENGINE
Never start the engine, or leave it
running, when the vehicle is in an
enclosed space. Exhaust gases are
poisonous and can cause
unconsciousness and death if inhaled.
If the engine fails to start, do not
continue cranking as this will discharge
the battery. It may also damage the
catalytic convertor due to unburnt fuel
passing through the exhaust.
Note: The Smart key may not be detected if it
is placed within a metal container or if it is
shielded by a device with a back-lit LCD screen,
such as a smart phone, laptop (including when
inside a laptop bag), game console etc. Keep
the Smart key clear of such devices when
attempting Keyless entry or Keyless starting.
To start the engine:
1.
Make sure that a valid Smart key is inside
the vehicle.
2.
Make sure that Park (P) or Neutral (N) is
selected.
3.
Firmly press the brake pedal.
4.
Press and release the engine START/STOP
button.
Note: For vehicles with diesel engines, the
delay period before cranking begins will be
longer in low ambient temperatures due to
extended glow plug operation. During this
extended delay the brake pedal must remain
pressed.
Once the engine has started, the brake pedal
can be released if it is safe to do so.
SWITCHING OFF THE ENGINE
When the vehicle is stationary:
1.
Make sure that the vehicle is parked with
Park (P) selected and the parking brake
applied.
2.
Press and release the engine START/STOP
button.
It is not advisable to switch off the
engine while the vehicle is moving.
However, if a situation arises where
engine switch off is urgent, the following
procedure applies:
1.
Press and hold the engine START/STOP
button for 2 seconds, or
2.
Press and release the engine START/STOP
button twice within 3 seconds.
SWITCHING ON THE IGNITION
To switch on the ignition without starting the
engine:
70
Starting the engine
L
FOR REFERENCE ONLY
24.07.2015