SDS

Material Safety Data Sheet
1. Product Identication and Company
Product Name EX-CEL PVC Foam Sheet
Manufacturer Jain Irrigation Systems Ltd.
Jain Fields, N.H.6, Bambhori,
Jalgaon 425001 (India)
Chemical Family Vinyl Polymers
Chemical Name Polyvinylchloride Sheet
CAS No. Not applicable
Formula Proprietary
2. Composition / Information on Ingredients
No. Components CAS No. Percent Exposure Limits
1. PVC Resin 9002-86-2 > 70% TVL (ACGIH-USA) TWA =
10 mg/M
3
(Inhalable PNOC)
OES(HSE-UK) TWA =
10 mg/M
3
(Inhalable PNOC)
TLV (ACGIH-USA) TWA =
3 mg/M
3
(Resirable PNOC)
2. Tin Stabilizer Not declared by supplier < 2% ACGIH TWA & OSHA_TRANS
PEL = 0.1 mg/M
3
(as Sn)
ACGIH STEL (Skin) = 0.2 mg/ M
3
(as Sn)
3. Calcium Carbonate 1317-65-3 < 20% TLV 5 mg/M
3
in air
4. Titanium Dioxide 13463-67-7 < 15% PEL (OSHA) 15 mg/M
3
total
dust, 8 Hr. TWA
TVL (ACGIH) 10 mg/M
3
total
dust, 8 Hr. TWA
5. Proprietary Mixtures < 9% Not established
3. Physical and Chemical Properties
Physical Form Solid
Color Finishedsheetwithcolorsspecied
Odor Insignicant
Boiling Point Not Applicable
Melting Point Not Established
Freezing Point Not Applicable
Solubility in Water None
SpecicGravity <0.85(water=1)
Vapor Density Not Applicable (air ~
~
1)
Evaporation Rate None (Butyl Acetate = 1)
Vapor Pressure Not Applicable
% Volatile None
pH Not Applicable
Thephysicaldatapresentedabovearetypicalvaluesandshouldnotbeconstruedasaspecication.
Usual procedures for handling and storage are to be observed. No special precautions required.
Evacuate machining shavings to prevent slipping or tripping hazard. During mechanical treatment,
Respiratory protection not required. Wear safety glasses during machining. Hand gloves to be
while handling hot material.
8. Stability and Reactivity
Decomposition begins at 380° C. Fumes evolved by overheating or
burning may be injurious to health.
Thermal Decomposition
7. Exposure Controls / Personal Protection
5. Accidental Release Measures
6. Handling and Storage
Take up mechanically
effective exhaust ventilation must be provided
acids, phenol and phenol derivatives may occur.
Hazardous Decomposition
Hazardous reaction
No hazardous reaction observed.
Formation of trace of aliphatic and aromatic hydrocarbons, ldehydes,
Caused by smoldering and incomplete toxic combustion. Fumes
consisting of carbon monoxide and carbon dioxide may evolve.
official rules and regulations.
9. Toxicological information
None
10. Ecological information
Water pollution class (WGK) : 0 – Generally non-hazardous to water.
This information is furnished without warranty, expresse or implied except that it is accurate to the best knowledge of
Jain Irrigation Systems Ltd. Neither Jain Irrigation Systems Ltd. Nor any of its subsidiaries assume any liability
whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of
any material is the sole responsibility of the user. All materials may present unknown hazards and should be used
with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards
that exist. Jain Irrigation Systems Ltd. assumes no legal responsibility for loss, damage or expense arising out of, or
in any way connected with the handling, storage, use or disposal of this product.
12. Transport information
Safe during transport and keep in dry condition.
13. Regulatory information
No labeling is required in accordance with the EEC directives.
WGK = Classification in accordance with the German Water resource act.
11. Disposal consideration
Can be recycled. May be discharged or incinerated together with household refuse observing local
Jain Irrigation Systems Ltd.
Jain Plastic Park, N.H.6, Bambhori
Jalgaon 425 001 (India)
Tel: [phone]
Jain Americas, Inc.
1819 Walcutt Road, Suite I
Columbus, Ohio 43228
866-473-7539
Usual procedures for handling and storage are to be observed. No special precautions required.
Evacuate machining shavings to prevent slipping or tripping hazard. During mechanical treatment,
Respiratory protection not required. Wear safety glasses during machining. Hand gloves to be
while handling hot material.
8. Stability and Reactivity
Decomposition begins at 380° C. Fumes evolved by overheating or
burning may be injurious to health.
Thermal Decomposition
7. Exposure Controls / Personal Protection
5. Accidental Release Measures
6. Handling and Storage
Take up mechanically
effective exhaust ventilation must be provided
acids, phenol and phenol derivatives may occur.
Hazardous Decomposition
Hazardous reaction
No hazardous reaction observed.
Formation of trace of aliphatic and aromatic hydrocarbons, ldehydes,
Caused by smoldering and incomplete toxic combustion. Fumes
consisting of carbon monoxide and carbon dioxide may evolve.
official rules and regulations.
9. Toxicological information
None
10. Ecological information
Water pollution class (WGK) : 0 – Generally non-hazardous to water.
This information is furnished without warranty, expresse or implied except that it is accurate to the best knowledge of
Jain Irrigation Systems Ltd. Neither Jain Irrigation Systems Ltd. Nor any of its subsidiaries assume any liability
whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of
any material is the sole responsibility of the user. All materials may present unknown hazards and should be used
with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards
that exist. Jain Irrigation Systems Ltd. assumes no legal responsibility for loss, damage or expense arising out of, or
in any way connected with the handling, storage, use or disposal of this product.
12. Transport information
Safe during transport and keep in dry condition.
13. Regulatory information
No labeling is required in accordance with the EEC directives.
WGK = Classification in accordance with the German Water resource act.
11. Disposal consideration
Can be recycled. May be discharged or incinerated together with household refuse observing local
Jain Irrigation Systems Ltd.
Jain Plastic Park, N.H.6, Bambhori
Jalgaon 425 001 (India)
Tel: [phone]
Jain Americas, Inc.
1819 Walcutt Road, Suite I
Columbus, Ohio 43228
866-473-7539