User Manual

PAIRING
SET UP
Select a method to hold the Viewer
VIEWER STAND
- Insert the VIEWER into the VIEWER
STAND. Viewing angle is adjustable.
SNAP WRIST BAND
- Slap the SNAP WRIST BAND onto
your wrist. Insert the VIEWER into the
VIEWER CLIP.
WRIST WATCH BAND
- Insert the VIEWER into the VIEWER
CLIP.
NECKLACE
- Insert the VIEWER into the NECK
LACE CLIP.
- Open the CLASPS, place around
your neck and close the CLASPS.
FRAMESTAND / BELT CLIP
- Insert the VIEWER into the
FRAME/BELT CLIP.
- FRAME Open the FRAME STAND
and set unit on flat surface.
- BELT Open the BELT CLIP and
attach unit to BELT.
AC/DC ADAPTOR
- Secure the cord to the wall using the 6
ELECTRICAL CORD HOLDER included
to keep cord away from the baby’s
reach.
- Plug the AC/DC ADAPTOR into the
back of the BABYWATCH CAMERA as
shown.
- Plug the other end into a 110V AC
outlet.
VIEWER STAND
REAR VIEW OF CAMERA
WRIST WATCH BAND NECKLACE
TILT DOWN OR UP ROTATE LEFT OR RIGHT
FRAME STAND BELT CLIP
AC/DC ADAPTOR 110 V AC OUTLET
SNAP WRIST BAND
WI-FI AND WEBSITE SET UP
- Move the ON/OFF Switch on Babywatch camera to ON position.
- Plug the USB CABLE into the USB PORT on the back of the CAMERA.
- Plug the other end into your computer. Click on the FLASH DRIVE ICON.
- For Macintosh, Open the SET UP ICON in the MacOSX directory and
follow the directions.
- For Windows, Open the SET UP ICON in the MS Windows directory and
follow the directions.
- For more detail, please go to the website
“www.babywatchmonitor.com”.
(Unplug the USB cable after set up is completed.)
- Set the Babywatch 2.0 Camera on a flat surface with an unobstructed view of your child.
- Once the camera is connected with either your computer or the VIEWER, you can TILT or ROTATE camera
through camera controls on the Viewer or website to get the best view. You may also use your compatible
iDevice, Smart Phone or Smart Tablet but requires download of the BABYWATCH APP.
- For the best performance, do not place the Viewer within 18 inch of the Babywatch Camera.
SET UP
Set up the Babywatch 2.0 Camera
Flat Surface Mounting
CLASPS
USB CABLE
VIEWER
2 3
WARNING Never place camera
or cords within 3 feet of the crib.