User Manual

PAIRING
A
M
00:00
01.01.2012
- Plug the USB CORD into the side of
the CAMERA VIEWER as shown.
- Plug the other end into your computer
or a USB adaptor.
- BATTERY ICON in VIEWER SCREEN
will show when fully charged.
- Remove USB CORD. Battery charge
will last approximately 12 hours.
(Sleep mode)
*USB port on viewer is used for
charging purpose only.
VIEWER CHARGING
STEP 5 STEP 6
STEP 2STEP 1
STEP 4STEP 3
Wall Mounting
1/4” HOLE
BATTERY ICONS
LOWFULL
- STEP
DRILL a 1/4” HOLE in the wall.
Insert wall anchor into the hole.
Insert screw into the wall anchor.
- STEP
Place the BABYWATCH CAMERA
on the SCREW and LOWER slightly
to secure.
- STEP
Plug the AC/DC ADAPTOR into the
back of the BABYWATCH CAMERA
as shown.
- STEP
Plug the other end into a 110V AC
outlet.
- STEP
Remove the BACKING from the
ELECTRICAL CORD HOLDER.
- STEP
Use the ELECTRICAL CORD
HOLDERS to attach the AC/DC
ADAPTOR CORD to the wall.
The Babywatch 2.0 Camera can be
mounted on a wall overlooking your
baby. Once the camera is connected
with your WI-FI system, you can TILT
or ROTATE camera through camera
controls on the Viewer, iDevice,
Smart phone or Website to get the
best view.
SET UP
Set up the Babywatch 2.0 Camera
Charge the Babywatch 2.0
Camera Viewer
Babywatch 2.0 Camera
CONTROLS
LIGHT SENSOR
POWER ON LIGHT
CAMERA LENS
MICROPHONE
WI-FI INDICATOR
USB PORT
PAIRING BUTTON
ON/OFF SWITCH
AD/DC ADAPTOR PLUG
SPEAKER
Camera Viewer
USB PORT
VIEWING SCREEN
MENU / BACK
MICROPHONE
RESET BUTTON
SPEAKER
2.4GHZ SIGNAL STRENGTH
TIME
DATE
CAMERA NUMBER
BATTERY LEVEL
1
3
4
2
5 6 7 8 9
10
4 5
1 2
7
8
9
3 4 5 6
10
11
ADULT ASSEMBLY ONLY
Always keep unattached screws away
from young children to avoid risk of
small component and sharp end.
1
1
2
3
4
5
6
1
2
3
4
5
6
7
8
9
10
7
8
9
10
11
2
3
4
5
6