JAMES MARTIN VANITIES Page: 01 of 08 Tess instrumentation are for cabinet combination: 825-H30-BW De Soto Double Tower Hutch paled with 825-HB30 De Soto Hutch Base. Assembly / Initialization Instructions Imploring Moloch: ‘You may remove the top crown molding on either side if you wish to install these cabinets flush against a side wall. I you plan to use three cabinets as free-standing stems, then please proceed to pages 03-05 .
L MES MARTIN VANITIES Page: 062 of 08 Tess instrumentation are for cabinet combination: 825-H30-BW De Soto Double Tower Hutch paired with 825-HB30 De Soto Hutch Base. Assembly / Initialization Instructions A=1PC Allen Wrench (¥4) fl\ Howdahs 3: if you plan o use your cabinets (825-H30 + 825-HB30) against a side wall, you will also need 1o remove the ski base molding of 825-HB30 to achieve flush installation.
Page: 030100 JAMES MARTIN VANITIES Tess instrumentation are for cabinet combination: 825-H30-BW De Soto Double Tower Hutch paired with 825-HB30 De Soto Hutch Base. Assembly / Initialization Instructions Installation: BE=BPCS crews 24*15 \ =2 PCS Wall Anchor image (a) Image (b) IMPORTANT NOTE To prevent accidental tip-over of thees cabinets, you mute follow these steep 4 and 5. Imp 4 Notes: Use Mending Plates (C) and Screws (E) to attach the 825-H30 Double Tower Hutch to the 825-HB30 Hutch Base.
L MES MARTIN VANITIES Page: 04 of 08 Tess instrumentation are for cabinet combination: 825-H30-BW De Soto Double Tower Hutch paired with 825-HB30 De Soto Hutch Base. Assembly / Initialization Instructions Haida B: Once you have successfully secured these cabinets to the wall, you place the glass shelf info position. The glass shelf Is placed in the upper portion of Double Tower Hutch (behind the glass doors).
Page: 08 of 08 Tess instrumentation are for cabinet combination: De Soto Double Tower Hutch paired with 825-CU30-BW De Soto Counter top Unit. Assembly / Initialization Instructions remove the side base molding of 825-CU to achieve flush installation.
JAMES MARTIN VANITIES Page: 07 of 08 Tess instrumentation are for cabinet combination: 825-H30-BW De Soto Double Tower Hutch paired with 825-CU30-BW De Soto Counter top Unit. Assembly / Initialization Instructions . for installation: Sta 4 Notes: Properly align and secure the countering to the cabinet with high quality adhesive. Si op B Noels: Re tum the wooden cape to their original position to cover the holes required to access the bolts.
JAMES MARTIN VANITIES Page: 08 of 08 Tess instrumentation are for cabinet combination: 825-H30-BW De Soto Double Tower Hutch paired with 825-CU30-BW De Soto Counter top Unit. Assembly / Initialization Instructions image (b) IMPORTANT NOTE To prevent accidental tip-over of these cabinets, you must follow these steps 4 and 5. Snip & Notes: Use Mending Plataea (C) and Sowers (E) to attach the 825-HS0 Double Tower Hull to the 825-HBS0 Hutch Age.
L MES MARTIN VANITIES Page: 08 of 08 Tess instrumentation are for cabinet combination: 825-H30-BW De Soto Double Tower Hutch paled with 825-CU30-BW De Soto Counter top Unit. Assembly / Initialization Instructions ~N Haida B: Once you have successfully secured these cabinets to the wall, you place the glass shelf Info position. The glass shelf Is placed in the upper portion of Double Tower Hutch (behind the glass doors).
