Page: paves war Tin varieties ‘Thees constructions g for cabinet combination: E444-H12-MCA Addison Petite Tower Hutch is mounted to a wall {Loading) Assemblymen / Affiliations retractions Tutorials for Installation: Drill Level Meringue Pollen F Pr-attached metal mounting (French Cleat) bracket Back Walk vanity ‘ cabinet Gfli‘u s Step 1 Notes: Sta 2 Notes: The metal mounting bracket has been Draw a horizontal line on the wall at your desired height.
Page: paves war Tin varieties ‘Thees constructions g for cabinet combination: E444-H12-MCA Addison Petite Tower Hutch is mounted to a wall {Loading) Assemblymen / Affiliations retractions Hammer Slop 4 Notes: After you have located the Wall stud, position the metal bracket so the hole align with the center points of the studs. Mark these positions with a pencil. Lop & Notes: Drill holes for the screws In the positions you have marked with the pencil.
Page: 0408 07 I paves war Tin varieties ‘Thees constructions g for cabinet combination: E444-H12-MCA Addison Petite Tower Hutch is mounted to a wall {Loading) Assemblymen / Affiliations retractions Tutorials for Installation: Drill Step 8 Notes: Attach the metal bracket to the Wall using the serene" included in the red hardware bag. Step 7 Notes: Hang the Hutch on the metal bracket.
