Operating Guide

OPERATION AND SAFETY MANUAL
Warranty
Jameson products carry a warranty against any defect in material and workmanship for a period of one year from date of shipment unless failure is due to
misuse or improper application. Jameson shall in no event be responsible or liable for modications, alterations, misapplications or repairs made to its products
by purchaser or others. This warranty is limited to repair or replacement of the product and does not include reimbursement for shipping or other expenses
incurred. Jameson disclaims any other express or implied warranty.
Part Number Rod Diameter X Length
16-14-300M 1/4” X 300’
16-14-400M 1/4” X 400’
16-14-500M 1/4” X 500’
16-14-600M 1/4” X 600’
• DO NOT USE ON LIVE CIRCUITS. DISCONNECT POWER. Metal tip on rod.
• Wear safety glasses and gloves.
• Keep rod inside reel when not in use. Out-of-control rod can harm personnel or property.
• Keep rod clean. Some contaminants (including water) can conduct electricity.
• Keep secure footing. Protect yourself from falling should pulling eye move suddenly or separate from rod.
• Check for rod damage prior to use. Cracks, gouges, nicks, or white stress marks on jacket or sharp bends will weaken rod.
Injury could result if rod breaks while pulling.
• Do not use slip joint pliers, locking pliers or powered pulling equipment on rod.
• Do not force a pull that is stuck. Remove wires and check for kinks or obstructions.
• Avoid pulling rod over sharp edges.
• Do not bend rod beyond 4” radius.
WARNING - ADHESIVE
Read manufacturer’s instructions before using adhesive. In case of eye contact, ush with water and seek medical atten-
tion If skin contact occurs, apply solvent (such as nail polish remover) to area and gently remove adhesive. Wash solvent
off with water. Solvents should not be used in case of contact with eyes or open wounds.
Always wear safety goggles (ANSI Std. Z87.1) and gloves when working with adhesive and/or unprotected berglass rod.
See adhesive product label for Safety Data Sheet (SDS).
Accessories
16-14-AK Accessory Kit
Roller Guide, End Ferrule, Splice Ferrule,
2 Adhesive, 2 Emery Cloth, Canvas Pouch
16-169 Flexible Spring Tip
Heavy duty spring attached to ball nose helps push
rod past difcult bends or debris in pipe
16-160 Swivel Eye Attaches pull line to rod
16-146 End Ferrule Kit End Ferrule, Adhesive, Emery Cloth
16-140 Splice Kit Splice Ferrule, Adhesive, Emery Cloth
End Ferrule
Splice Ferrule
Adhesive
Roller Guide With
Spring Adapter
Flexible Spring Tip
Accessory Kit Included. Other Accessories Sold Separately.
Jacket Core Wire