Use and Care Manual

The Wee Buddy’s round rod slides easily over existing wires,
especially at bends, and has a smooth, non-binding payout
and return to canister.
-
Canister features snap-on accessory kit.
• 1/8” OD Fiberglass Rod
• 1.5” Bending Radius
• 200-lb Pull/Tensile Strength
• Available With or Without Accessory Kit
• Dimensions: 12.5” Diameter x 2”
1/8”
OD ROD
.080” Core
Shown With Accessory Kit
12.5”
Part Number Wee Buddy®
8-18-50 50’ X 1/8” Wee Buddy - No Kit
8-18-50K 50’ X 1/8” Wee Buddy with Kit
8-18-100 100’ X 1/8” Wee Buddy - No Kit
8-18-100K 100’ X 1/8” Wee Buddy with Kit
8-18-150 150’ X 1/8” Wee Buddy - No Kit
8-18-150K 150’ X 1/8” Wee Buddy with Kit
Part
Number Accessories
8-160 Pulling Eye
8-162 Large Spring Leader
Guides rod through bends, sweeps and misalignments
8-163 Small Spring Leader
8-140 Splice Repair Kit Splice Ferrule, Adhesive, Emery Cloth, Instructions
8-146 End Ferrule Repair Kit End Ferrule, Adhesive, Emery Cloth, Instructions
8-18-AK Accessory Kit
Small Leader, Large Leader, 2 Pulling Eyes, 2 Splice Ferrules, 2 End
Ferrules, Adhesive, Emery Cloth, Plastic Case
Without Accessory Kit
For Occupied Conduit As Small as .5”
Wee Buddy® Fiberglass Fish Tapes
803.222.6400 WWW.JAMESONLLC.COM 800.346.1956
Accessory Kit