Instructions / Assembly

JA Pruners with Adapter
Attach Adapter
Remove bolt from Pruner.
Insert Adapter, lining up holes on
Adapter with bolt holes on Pruner.
Insert bolt and tighten.
Bolt
Eyebolt
Pulley
Blade
Base
JA-14 Fixed Pulley Pruner
JA-14S Swivel Pulley Pruner
JA-34 Big Mouth Pruner
Thread rope end over pulley and
tie to eyebolt on Adapter.
JA-14DP Double Pulley Pruner
JA-34DP Double Pulley Big Mouth Pruner
Thread rope over upper pulley, thread
under lower pulley on adapter and tie
end to upper pulley.
Attach Rope
Adapters Allow Quick and Easy Replacement of
Pruner Head or Pole Saw
Care For Pruner
Wipe down after use to remove
moisture and tree sap.
Lubricate to repel moisture and
prevent rust.
Base Pole Extension Pole
HOLD PRUNER BY BASE - NOT BLADE OR HOOK