Instructions / Assembly

ManualsBrandsJameson ManualsGarden Center16 in. Barracuda Tri-Cut Replacement Pruning Saw Blade (3-Pack)

Hold pruner by base, not blade or hook.

Work with pole held to the side, NOT pointed into the body.

Wear head, eye and face protection that meets

ANSI standards to avoid injury.

Wear sturdy, protective safety shoes or boots with non-skid soles.

Maintain secure footing and balance.

DO NOT USE NEAR ELECTRICAL LINES.

800.346.1956 www.SpartacoGroup.com

Professional Tree Care Tools

Pruners - Fiberglass Poles - Pole Saws

Summary of content (8 pages)

PAGE 1
Professional Tree Care Tools Pruners - Fiberglass Poles - Pole Saws Hold pruner by base, not blade or hook. Work with pole held to the side, NOT pointed into the body. Wear head, eye and face protection that meets ANSI standards to avoid injury. Wear sturdy, protective safety shoes or boots with non-skid soles. Maintain secure footing and balance. DO NOT USE NEAR ELECTRICAL LINES. 800.346.1956 www.SpartacoGroup.
PAGE 2
JA Pruners with Adapter Adapters Allow Quick and Easy Replacement of Pruner Head or Pole Saw HOLD PRUNER BY BASE - NOT BLADE OR HOOK Pulley Blade Base Bolt Eyebolt Extension Pole Attach Adapter Remove bolt from Pruner. Insert Adapter, lining up holes on Adapter with bolt holes on Pruner. Insert bolt and tighten. JA-14 Fixed Pulley Pruner JA-14S Swivel Pulley Pruner JA-34 Big Mouth Pruner Thread rope end over pulley and tie to eyebolt on Adapter.
PAGE 3
PH Pruners with Adapter Adapters Allow Quick and Easy Replacement of Pruner Head or Pole Saw HOLD PRUNER BY BASE - NOT BLADE OR HOOK Attach Saw Blade to PH-11 Pruner Extension Pole 1. Using flat head screwdriver & wrench, remove screw and nut holding blade. PH-11 Pruner accommodates Jameson’s SB-1T Or SB-2 Teflon Saw Blade, offering the benefit of two tools in one. 2. Place saw blade over blade bolt on pruner and line up holes. PH-12 Pruner does not accommodate a saw blade. Base Pole O-Ring 3.
PAGE 4
POLE SAWS Adapters Allow Quick and Easy Replacement of Pruner Head or Pole Saw Attach Saw Blade to Pole Saw Head Wing Nut Bolt PS-3FP With Mounting Pin Wing Nut Mounting Pin Lock Washer Remove wing nut and lock washer. Place saw blade over bolt and mounting pin. PS-3F / PS-3 Replace lock washer and wing nut, tighten. Wing Nut Bolt Remove wing nut, lock washer and carriage bolt nut. Place saw blade over bolt and carriage bolt. Replace washer, wing nut and carriage bolt nut.
PAGE 5
Fiberglass Poles With Leaf Spring Ferrules Connecting Poles or Attaching Tool Heads Lift leaf spring on pole’s female ferrule to allow male pole ferrule or tool head adapter to be inserted. Align holes and drop leaf spring’s button back into hole for a secure connection. Leaf Spring Male Ferrule Extension Pole Female Ferrule For Your Safety And Best Results, Jameson Recommends: Base Pole Use only Jameson attachments with Jameson poles. Always start with a Jameson Base Pole.
PAGE 6
Double Lock™ Telescoping Poles Pole Must Be Locked Into Position Before Using Outer Lock Collar Fig.1 Scan to Watch Double Lock™ Video Fig.2 To Adjust Pole Length: Unscrew threaded collar by turning until loose. (Fig. 1) Unlock inner lock by twisting upper pole section counter-clockwise, approximately quarter-turn, while holding lower pole section in place. (Fig. 2) Extend poles to desired length.
PAGE 7
Pruners & Pole Saws Permanent Mount - No Adapter HOLD PRUNER BY BASE - NOT BLADE OR HOOK Attach Rope JAPruners Permanently Mounted To Pole Thread rope end over pulley and tie to eyebolt on Adapter. Attach Saw Blade Pole Saw Heads Permanently Mounted To Pole Extension Pole Wing Nut Bolt Mounting Pin Wing Nut Lock Washer Base Pole Remove wing nut and lock washer. Place saw blade over bolt and mounting pin. Replace lock washer and wing nut, tighten.
PAGE 8
Warranty Jameson products carry a warranty against any defect in material and workmanship for a period of one year from date of shipment unless failure is due to misuse or improper application. Jameson shall in no event be responsible or liable for modifications, alterations, misapplications or repairs made to its products by purchaser or others. This warranty is limited to repair or replacement of the product and does not include reimbursement for shipping or other expenses incurred.