Indoor/Outdoor 1A2, 3A2, 3S, 3T, 8A2
Congratulations on your purchase of Jamo Indoor/Outdoor speakers. Package content. Speaker (2) Assembled bracket (2) Screw plug “g” (8) Port plug “i” (4) Thumb screw “j” (4) Covers “k” (4) Allen wrench (1) Manual (1) Bracket. The brackets comes pre-assembled. If disassembling the bracket for painting, re-assemble it as follow: Place the curved bracket (a) between the wall bracket (b) and wall bracket cover (c) as shown in fig. 1.
Connecting speaker wires. Loosen speaker terminals by turning counter clockwise. Strip ½”/12 mm insulation off each wire. Twist strands on each wire to form “solid” wire. Insert one wire into each terminal and tighten terminal by turning clockwise. Make sure positive (+) is to red terminal and negative (-) to black terminal for correct phasing. Adjustment of I/O 3T. This model is for 70V or 100V line installation.
Specifications Model I/O 1A2 I/O 3A2 I/O 3S I/O 3T I/O 8A2 System Woofer (in/mm) Tweeter (in/mm) Power (W long/short term) Sensitivity (dB/2.83V/1m) Frequency range (Hz) Impedance (Ohm) Weight (lb/kg) Dimensions HxWxD (in/mm) 2 way ported 4½/114 ½/13 Dome 20/40 86 77-20,000 6 5.1/2.3 9.1x6.3x6.6 232x160x168 2 way ported 5¼/133 1/25 Dome 40/80 88 64-20,000 8 6.9/3.2 11.4x7.9x8.2 290x200x209 2 way ported 5¼/133 2x1/25 Dome 40/80 88 55-20,000 8+8 8.3/3.8 11.4x7.9x8.
