User Manual

9
Spikes
After the initial placement of the C 80 fl oorstanders, you might consider using the
supplied spikes instead of the built-in rubber feet. To fi x them on, we recommend
that you gently lay the speaker on one side and screw in all four spikes together.
Before you do this, however, be sure to place a couple of thick towels or similar
underneath the side of the speaker. This will prevent accidental scratching to the
surface of the speaker.
2
1
After screwing in the spikes, gently bring the speaker to its vertical position. Once
upright simply adjust the spikes to give optimal support.
Using the spikes will give the very best support and sound quality. If you want to
spare your fl oor surface from being punctured however, you can place the indent-
ed metal washers underneath the spike.
A warning: be careful when using the spikes with the indented metal washers – you
don’t want to get your fi nger trapped between the two!
Whichever option you choose, avoid “walking” the speakers if you need to move
them to a different position… especially on hard wood fl oors!