• XT·250 Owner's Manual I Electronic Tuning AM/FM/MPX Radio with· Auto-Reverse Cassette Player and 40 Channel CB Transceiver. ~O-O' g ZCX1'~~ ~jJ ~ ~: ". ."@g"·. . Ie'::1 un '~I'''O ~ ~ ~ '7",," e Ii!! ~l5 ~v 0 , .• ,,, -::::... Iel ~ ~ ~ 1e1.~ 15 ::1: LI -" , .1..
(1 ) 1+.' .,A, ON VOl. rUSH .... (2) (4) (3) (5) ..-L 'AS PUS SO TRU UE\.C +'1.0'" ....... A , LID ftAOIO L:::. I~ SRf3ijiiii Iwl '\i7 TUN~ (16) (15) (14) " AUTO REVERSE ,x_ Fr' I 6 (13) (1) On-OH-Volume/Balance Control To turn the radio or CB on. turn this control clockwise until a slight click is felt. Continue lurnlng 10 Increase Ihe volume level. By firsl pushing Inward on Ihls knob while turning II In eilher direction.
(4) Squelch Control This knob Is to be used to determine how strong an incoming CB transmission must be to automatically "break-through" the radio or tape program being listened to. At low squelch settings almost all signals will be received (Including background carrier noise on occasions). Higher settings require a stronger Incoming signal to break through. Some experimentation will be necessary to find a suitable compromise. The squelch control has no effect on outgoing CB transmissions.
· (6) C asse tt e Eject Once II cassette Is playing, you can stop the playing and elect the cassette by firmly depressing this button. The cassette' will be partly released and can be easily removed from the tape sial Do not leave a casselle In the unit with the power off. Once the casselle Is ejected, the unit automatically reverts to radio operation. (7) Auto-Reverse Casselle Opening The casselle mechanism is protected by a door that automatically retracts when a casselle Is Inserted.
· and the lirst radio station is plOgrallll1led on tile lirst pre-set button. e. Repeat b, c and d for the remaining five pre-sets then change to the other band and re-program the six buttons for six additional stations on the other band. (11) Radio & Function Display Panel This LED panel provides a visual display of all radio functions. First it shows which radio frequency Is selected by displaying the numerical frequency.
• 1'1 ,'(15) Electronic CB Channel Setectors Thetwosoll-touch bullons allow quick and accurate CS ct,annel selection. to use the bullons first observe which channel Is displayed on the CB Channel Display. If the channel you want Is a higher number; press the button wllh the upward pointing arrow. If the desired channel is a lower number. depress the downward pointing arrow. Each lime the selected bullon Is briefly depressed and released. the channels will advance one digit.