User's Manual

Jana m Tech nologie s
Get t ing St a rt e d
I NSTALLI N G THE BATTERY
1. To access t he bat ter y com par t m ent, t urn t he bat t ery screw counterclock wise to open t he latch and
rem ove batt ery cover.
2. Posit ion t he bat t ery- lift st rap, place t he Lithium - ion bat t ery and snap into place.
3. Replace t he bat t ery cover by posit ioning t he top prongs fi r st and sliding cover into place.
Tighten batt ery screw by tur ning clock wise.
CALI BRATI NG TH E SCREEN
The fi rst tim e the dev ice is turned on, the Welcom e Utilit y appears. To set up the dev ice, follow t he on-screen instructions
using t he st ylus t o tap the exact cent er of each t arget
Not e: I f your XM Series device cam e pre- loaded with a custom software applicat ion, the Welcom e Utilit y m ay not appear.
BRI GH TNESS/ CON TRAST/ BACKLI GH T ADJUSTMEN T
To adj ust LCD brigthness, press and hold the funct ion key and adjust on-screen slider with t he st ylus, or use t he left /
right arrow keys.
To adj ust the LCD back light , t ap t he following sequence: Start > Set t ings > Display > Backlight , t hen use controls
presented t o adjust settings.
5