User's Manual

Getting started installing card and battery
Installing MicroSD card
1. Remove battery if necessary
2. Insert MicroSD card into the card slot
3. Make sure the card connector (the golden contacts) should be at the front of
insert
3
4
Installing battery
– If battery cover is installed on the device,
slide the battery latch to the left.
– The battery cover will lift up slightly, grasp
the battery cover and remove it
– Insert the battery, left side (with golden
contacts) first, into the battery compartment
– Press the battery down until the battery
fully rests on the bottom of battery
compartment
– Put the battery cover back, tab first, and
press down until the latch secure the
battery cover