User Manual

1. Press bag ring into body as shown until snap is

heard. Use ﬁ rm hand pressure; do not pound.

2. Leaf-Master wheels may be replaced simply by

pulling assembly ﬁ rmly upward. Reverse procedure

to install new wheel assembly.

4. A full line of replacement parts and accessories

including an extra large bag and a ﬁ ne mesh bag

are available at your local pool store. Be sure to ask

for genuine Jandy Pro Series replacement parts and

accessories by name.

3. Surface Skimming

Invert the Leaf-Master allowing the powerful water

jets to drive the Leaf-Master to the surface. Surface

skimming is accomplished by slightly tilting the unit to

the left or right as shown.

Leaf Master

Assembly Instructions

PAGE 1
Leaf Master® Assembly Instructions 1. Press bag ring into body as shown until snap is heard. Use ﬁrm hand pressure; do not pound. 2. Leaf-Master wheels may be replaced simply by pulling assembly ﬁrmly upward. Reverse procedure to install new wheel assembly. 3. Surface Skimming Invert the Leaf-Master allowing the powerful water jets to drive the Leaf-Master to the surface. Surface skimming is accomplished by slightly tilting the unit to the left or right as shown. 4.
PAGE 2
Page 2 Jandy® Pro Series Leaf Master® | Assembly Instructions Use of Leaf-Master Attach the Leaf-Master to your pool pole and garden hose, place in pool and turn on water pressure. Leaf-Master is easily maneuvered around the floor of the pool to pick up loose debris. For easier maneuverability, throw excess garden hose into pool. Emptying Collector Bag The collector bag may be emptied by pushing bag back through the Leaf-Master throat.