User Guide

ManualsBrandsJandy ManualsOtherAQUALINK RS ONETOUCH

Page 14

Section 4. Using the Equipment On/Off Model Specic Menus

TEMP1 (Pool or Spa Only)

TEMP1 is the priority temperature. It must be set higher than TEMP2, and it overrides TEMP2 whenever it is

enabled. Set temperature for TEMP1 before setting temperature for TEMP2.

To set TEMP1 (Pool or Spa Only)

Highlight TEMP1 and press SELECT twice. Use the UP/DOWN arrow keys to set the desired water temperature and

press SELECT to make that degree setting take effect. Return to the main menu by using the BACK button.

TEMP2 (Pool or Spa Only)

TEMP2 is the maintenance (low) temperature. It must be set lower than TEMP1. If TEMP2 is on and TEMP1 is

activated, TEMP2 will turn off and ENABLED will flash. When TEMP1 is turned off again, TEMP2 will reactivate.

To set TEMP2 (Pool or Spa Only)

Highlight TEMP2 and press SELECT twice. Use the UP/DOWN arrow keys to set the desired water temperature and

press SELECT to make that degree setting take effect. Return to the main menu by using the BACK button.

Filter Pump (Dual Equipment)

The FILTER PUMP selection turns the main filtration pump on or off for circulation to the pool. The filter pump also

activates if the spa is turned on, if the pool cleaner is turned on, or if the spa spill-over effect is activated. The main

filtration pump circulates the pool or spa water through the filter and heater. It must be on if you want to display the

pool temperature, or if you want to heat the pool.

To use Filter Pump (Dual Equipment)

Highlight FILTER PUMP and press SELECT. Use the SELECT button to turn the equipment on or off.

FILTER PUMP ON

TEMP 2

SOLAR HEAT

AUX 1

AUX 2

AUX 3

AUX 4

AUX 5

AUX 6

AUX 7

ALL OFF

TEMP 1

OFF

TEMP 1

must be set

higher than

TEMP 2

press ANY key

to continue.

TEMP 1

ENABLED

SET TO 80°F

Use ARROW KEYS

to set value.

Press SELECT

to continue.

FILTER PUMP ON

TEMP 2

SOLAR HEAT

AUX 1

AUX 2

AUX 3

AUX 4

AUX 5

AUX 6

AUX 7

ALL OFF

TEMP 1

OFF

FILTER PUMP ON

TEMP 2

SOLAR HEAT

AUX 1

AUX 2

AUX 3

AUX 4

AUX 5

AUX 6

AUX 7

ALL OFF

TEMP 1

OFF

TEMP 1

must be set

higher than

TEMP 2

press ANY key

to continue.

TEMP 2

ENABLED

SET TO 80°F

Use ARROW KEYS

to set value.

Press SELECT

to continue.

FILTER PUMP ON

TEMP 2

SOLAR HEAT

AUX 1

AUX 2

AUX 3

AUX 4

AUX 5

AUX 6

AUX 7

ALL OFF

TEMP 1

OFF

FILTER PUMP OFF

SPA PUMP

POOL HEAT

SPA HEAT

AUX 1

AUX 2

AUX 3

AUX 4

AUX 5

AUX 6

AUXB1

OFF

FILTER PUMP ON

SPA PUMP

POOL HEAT

SPA HEAT

AUX 1

AUX 2

AUX 3

AUX 4

AUX 5

AUX 6

AUXB1

OFF