User Guide

ManualsBrandsJandy ManualsOtherAQUALINK RS ONETOUCH

Page 23

OneTouch Menu

This menu allows custom configuration of the three OneTouch mood/scene buttons. You can choose a predetermined

name from the SELECT NAME menu or enter a CUSTOM NAME. You can also select specific devices for each

mood/scene button. Each mood setting allows for an independent thermostat setting. OneTouch setting can also be

assigned to any SpaLink button.

To set up the OneTouch Buttons

Highlight MENU/HELP and press SELECT, highlight SYSTEM SETUP and press SELECT, highlight ONETOUCH

and press SELECT. Select ONETOUCH SETUP and press SELECT. Use the UP/DOWN arrow keys to choose

between SELECT NAME, or CUSTOM NAME. (For Custom Name use the UP/DOWN arrow keys to change a letter

and press SELECT to move to the next letter.)

NOTE The blank space, as used in between words, is located between the "Z" and "0" characters.

SET DEVICES: Use the SELECT button to choose a device for your choice of mood/scene settings. When an item is

selected, the ON will be displayed on the right side of the screen. Select all pieces of equipment for that ONETOUCH

button, then press the BACK button to set up next ONETOUCH setting.

Section 7. Using the System Setup Menu

SYSTEM SETUP

ONETOUCH

LABELAUX

FREEZE PROTECT

AIR TEMP

DEGREES C/F

TEMP CALIBRATE

IN FLOOR CLEAN

SOLAR PRIORITY

ONETOUCH SETUP

Select ONETOUCH

setup and press

SELECT

SPA MODE 1

CLEAN MODE 2

ONETOUCH 3

DAYPARTY

NIGHTPARTY

SPAMODE

POOLMODE

ONETOUCH SETUP

ONETOUCH 3

Use arrow keys to

change letter

Press SELECT to

move to next

letter

ONETOUCH SETUP

CUSTOM NAME

ONETOUCH 3

BACKSPACE

ONETOUCH SETUP

ONETOUCH 3

SELECT NAME

CUSTOM NAME

SET DEVICES

POOL PUMP

SPA PUMP

POOL HEAT

SPA HEAT

SOLAR HEAT

AUX1

AUX2

AUX3

AUX4

ONETOUCH SETUP

ONETOUCH 3

ONETOUCH SETUP

ONETOUCH 3

SELECT NAME

CUSTOM NAME

SET DEVICES

ONETOUCH SETUP

ONETOUCH 3

SELECT NAME

CUSTOM NAME

SET DEVICES

OFF