User Guide

Page 34
Heat Pump Menu
The HEAT PUMP SETUP menu is used to put the heat pump into the heat or chill mode. If the heat mode is selected,
then HEAT PUMP will be displayed on the EQUIPMENT ON/OFF menu. If chill mode is selected then CHILLER
will be displayed on the EQUIPMENT ON/OFF menu.
NOTE In addition to setting heat or chill mode from the Heat Pump Setup menu, the switch on the heat pump must be manually
set to heat or chill.
To set the Heat Pump
Highlight MENU/HELP and press SELECT, highlight SYSTEM SETUP and press SELECT, highlight HEAT PUMP
and press SELECT. Use the UP/DOWN arrow keys to highlight either HEAT or CHILL, then press SELECT. A
message will be displayed informing the user that they must walk out to the heat pump and set it to heat or chill mode
as well.
SYSTEM SETUP
SPA SWITCH
SPA LINK
DUSK SETUP
ALL OFF TIME
PRODUCT INFO
CLEAR MEMORY
HEAT PUMP
DEVICE RUNTIME
MORE
HEAT PUMP
SETUP
Choose setting
and press SELECT
HEAT MODE
CHILL MODE
HEAT PUMP
SETUP
HEAT/COOL MODE
MUST BE SET AT
HEAT PUMP
CONTINUE
HEAT PUMP
SETUP
DID YOU SELECT
THE PROPER
HEAT/COOL MODE
AT THE
HEAT PUMP?
YES
NO
Laminar Light Menu
The LAMINAR LIGHT menu is used to assign a Laminar Light to an auxiliary relay.
To assign a Laminar Light to an AUX
Highlight MENU/HELP and press SELECT, highlight SYSTEM SETUP and press SELECT, highlight LABEL AUX
and press SELECT. Use the UP/DOWN arrow keys to highlight the AUX that will be used to control the Laminar
Light, then press SELECT. Highlight LIGHT LABELS and press SELECT. Use the UP/DOWN arrows and scroll
down until LAMINAR PLSR is highlighted. Press SELECT.
SYSTEM SETUP
ONETOUCH
LABEL AUX
FREEZE PROTECT
AIR TEMP
DEGREES C/F
DAYLIGHT SAVIN
TEMP CALIBRATE
IN FLOOR CLEAN
MORE
LABEL AUX
AUX1
AUX2
AUX3
AUX4
AUX5
AUX6
AUX7
LABEL AUX2
CURRENT LABEL
AUX2
LIGHT LABELS
GENERAL LABELS
WTRFALL LABELS
CUSTOM LABELS
LABEL AUX2
LIGHT LABELS
GARDEN
GAZEBO
HALL
HOUSE
KITCHEN
LAMINAR PLSR
LEFT
MORE
LABEL AUX
AUX1
LAMINAR PLSR
AUX3
AUX4
AUX5
AUX6
AUX7