User's Manual

4. For (Mono) connection, connect the 1/4” mono male end of the cable to the

left mono output (L/MONO) located on the back panel of the digital instrument.

For (Stereo) connection, connect the two 1/4” male ends of the cable to the

left (L/MONO) and right (R) outputs located on the back panel of the

digital instrument.

6. Power up the transmitter by pressing and holing the POWER button

for 2 seconds.

7. Press and hold the Mode button until the Blue LED display

two fast ashes for stereo Line-in mode operations.

Please refer to the “Tx Button Function Matrix” section of this manual for detailed instructions

6. Place the transmitter (Tx) dongle on top of your musical instrument. Alternatively

the receiver can be placed on the next to the musical instrument.

Please proceed to page 28 for the receiver connection

TRANSMITTER CONNECTION

Wi-AudioLink

(L/MONO)

Digital Instrument

(R)

(Tx)

1/4” Stereo Y-Split to 1/8’

Stereo Cable