Instructions

www.janitza.de

UMG 605-PRO

4. 5 Features

General

• Installation on a 35 mm DIN rail

• LCD display and operation via 2 buttons

• 4 voltage and 4 current measurement inputs

• 1 temperature measurement input

• 2 digital outputs and 2 digital inputs

• RS485 interface (Modbus RTU, Modbus master, BACnet (optional))

• RS232 interface (Modbus slave)

• Proﬁbus DP/V0

• Ethernet (web server, e-mail, BACnet (optional))

• Suitable for installation in installation distributors

• Working temperature range -10 °C to +55 °C

• Analysis and evaluation in accordance with DIN EN50160 with the GridVis®

programming software that is supplied as standard

• Data logger / event store (128 MB ﬂash drive)

• Capture events such as overvoltages, voltage dips, network failures

and overcurrent

Measurement

• Measurement of the power quality in accordance with DIN EN61000-4-30:2009

class S

• Measurement in IT, TN and TT networks

• Measurement of the harmonics and interharmonics (Uln, Ull, I) in accordance with

DIN EN61000-4-7

• Flicker measurement in accordance with DIN EN61000-4-15:2011 Class F3

• Measurement of ripple control signals (U, I, P, Q)

• Continuous sampling of the voltage and current measurement inputs

• Capture transients >50 µs and store up to 16,000 sampling points

• Capturing more than 2400 measured values per measurement cycle (200 ms)

• Fourier analysis 1st to 63rd Harmonics for Ull, Uln, I, P (consumption/delivery)

and Q (ind./capacitive)

• Temperature measurement

• Active energy; measurement uncertainty in accordance with DIN EN62053-22,

class 0.5 S for ../5A converter

• Reactive energy; measurement uncertainty in accordance with DIN EN62053-23,

class 2

• Programming separate applications in Jasic