User manual

102
UMG 96RM
Declaration of conformity
The UMG 96RM fulfills the following protection requirements:
Directive 2004/108/EG in conjunction with DIN EN61326-1:2011 (IEC 61326-1:2010) as well as
directive 2006/95/EG in conjunction with DIN EN 61010-1:2011 (IEC 61010-1:2011) and
DIN EN 61010-2-030:2011 (IEC 61010-2-030:2011)
Observed standards:
Noise immunity
DIN EN 61326-1:2006 (IEC 61326-1:2005) Electrical equipment for measurement, control and laboratory use –
EMC requirements - part 1: General requirements
Class A: Industrial area
DIN EN 61000-4-2:2009 (IEC 61000-4-2:2008) Electrostatic discharge 4 kV/8 kV
DIN EN 61000-4-3:2008 (IEC 61000-4-3:2007) Electromagnetic RF field 80-2700MHz
DIN EN 61000-4-4:2010 (IEC 61000-4-4:2010) Burst immunity1kV/2kV
DIN EN 61000-4-5:2007 (IEC 61000-4-5:2005) Surge immunity 1kV/2kV
DIN EN 61000-4-6:2009 (IEC 61000-4-6:2008) Conducted RF disturbances 0,15-80MHz / 3V
DIN EN 61000-4-8:2010 (IEC 61000-4-8:2009) Power frequency magnetic field, 30A/m
DIN EN 61000-4-11:2005 (IEC 61000-4-11:2004) Voltage dips, short interruptions and voltage variations
Noise emission
DIN EN 61326-1:2006 (IEC 61326-1:2005) Electrical equipment for measurement, control and laboratory use –
EMC requirements:
Class B: Residential, commercial and light-industrial environments
DIN EN 61326-1 / 7.2 (CISPR 11) Radio disturbance field strength 30MHz – 1GHz
DIN EN 61326-1 / 7.2 (CISPR 11) Radio disturbance voltage 0,15MHz – 30MHz
Gerätesicherheit
DIN EN 61010-1:2011 (IEC 61010-1:2011) Safety requirements for electrical equipment for measurement,
control and laboratory use - part 1: General requirements
DIN EN 61010-2-030:2011 (IEC 61010-2-30:2011) Part 2-030: Particular requirements for testing and measuring circuits