Full Product Manual

v Lower the presser foot and pull the buttonhole lever

down as far as it will go.

y Buttonhole lever

NOTE:

The reference lines on the buttonhole foot can be

used as a positioning guide.

Make sure there is no gap between the slider and

front stopper, otherwise the buttonhole will be out of

position or there will be a sewing gap.

u No gap

i Starting point

o Reference lines

!0 Slider

!1 Stopper

!2 Sewing gap

b Start sewing while pulling the needle thread lightly to

the left. After sewing a few stitches, free the thread

and continue sewing.

NOTE:

If you start sewing without pulling down the buttonhole

lever, the LCD screen will show a warning and

the machine will stop after a few stitches. Pull the

buttonhole lever down and start sewing.