Instruction Booklet

21
Stretch Stitch Patterns
q
Pattern selector: A-G
w
Presser foot: Zigzag foot
e
Thread tension: 1–4
r
Stitch length: S.S.
If forward and reverse feeds become unbalanced
due to the type of fabric, adjust the balance by
turning the stitch length dial as follows:
Ifpatternsarecompressed,turnthedialtoward“+”.
Ifpatternsaredrawn,turnthedialtoward“–”.
(See page 11)
w e
q
r
w e
q
Baste (or fuse with iron-on fabric joiner) applique
pieces on the fabric.
Stitch around the applique making sure the needle
falls along the outer edge of the applique.
When sewing corners, lower the needle down into
the fabric.
Raise the presser foot and pivot the fabric to the
right or left.
Applique
q
Pattern selector: C
w
Presser foot: Zigzag foot
e
Thread tension: 1–4
r
Stitch length: 0.5–1
r