Operation Manual

44
q
ew
Stippling Stitch
q Stitch pattern: Mode 3: 18
w Thread tension dial: 3 to 6
e Presser foot: Satin stitch foot F
Custom crafted zigzag foot F2
* Stitch patterns 16, 17 or 19 in mode 3 can also be used.
A pre-programmed stippling stitch is a fast and easy
method to quilt small areas.
Place a batting (wadding) between quilt top and backing
fabric.
q
ew
Patchwork Piecing
q Stitch pattern: MODE 3: 01 and 43
w Thread tension dial: 3 to 6
e Presser foot 1/4˝ seam foot O
Zigzag foot A
w
z Place the patchwork pieces right sides together.
Select stitch pattern 01 in mode 3. Sew while guiding
the edge of the fabric along the guide on the foot to
keep a precise 1/4˝ seam allowance.
q Wrong side of fabric
w Right side of fabric
q
w
w
z
x c
x Select stitch pattern 43 in mode 3. Replace the
presser foot to Zigzag foot A.
c Press the seam allowance to open. Sew stitch pattern
43 on the right side of the garment centering over the
seam line.
* Stitch patterns 12, 13, 14, 15, 20 or 21 in mode 3 can
also be used.
• Angle scale on the needle plate
You can easily seam patchwork pieces at the desired
angles without marking, by using the unique angle
scales on the needle plate.
The angle scales are marked at 45, 60, 90 and 120
degrees.