Instruction Booklet

42
[1.0] [2.2] [5.0]
q
wer
• To adjust the stitch length
Press the cursor buttons to move the cursor q
under the stitch length value “2.2” w (default setting).
Press the button to decrease stitch length.
Press the button to increase stitch length.
The stitch length can be varied from 0.0 to 5.0.
q Cursor
w Stitch length (2.2)
NOTE:
Reverse stitch length cannot be set longer than 4.0.
w
q
• To adjust the needle drop position
The needle drop position can be adjusted for straight
stitch patterns 00 – 04.
Press the cursor buttons to move the cursor
under the stitch width value “3.5” q (default setting).
Press the button to move the needle to the right r.
Press the button to move the needle to the left w.
q Stitch width (3.5)
w Left (0.0)
e Middle (3.5)
r Right (7.0)