User Manual

ManualsBrandsJanome ManualsJanomeC30 Computerized Sewing Machine with 30 Stitches, including Buttonhole, Jam-Proof Bobbin and LCD Screen

WHAT’S NEXT

janome.com • janome.ca

Page 1

Bobbin Winding

In order to ensure correct bobbin winding, follow

the below diagram for correct threading. Use both

hands to thread machine around the guide for

correct tension.

Pro tip:

Because different brands of thread unwind

in various manners, sometimes it is helpful to lightly

hold the thread as it comes off the spool. This will

help create smooth and tightly wound bobbins -

which is important for a good stitch.

Congratulations on the purchase of your new sewing machine. We’ve compiled a few tips that

will help you get the most out of your new purchase and increase your enjoyment of sewing.

Note: Your machine may vary from these illustrations. Always refer to your

instruction manual for exact details on your machine.

Ready-Set-Sew

Getting Started Guide

1 2 3

4 5 6

Top Threading

Before you begin to thread, make sure the presser foot is

in the

position and the needle is at the highest position.

Lift the foot by using the presser foot lifter behind the

machine. To raise the needle, always turn the handwheel

on the right side of the machine toward you. This will help

ensure that the threading guides are in the proper position

to receive the thread.

Guide thread from

back to front

Push bobbin winder spindle to

the right. Start the machine.

Bobbin mark

appears on

LCD display

Guide thread into bobbin

winder tension disk

Stop the machine to snip the

tail once a vew

layers are wound.

Restart the

machine.

Thread bobbin

as shown.

Snap bobbin

into place.

Machine will stop winding

when fully wound. Press

the start/stop

button and return

winder spindle

to the left

position.

Summary of content (4 pages)

PAGE 1
Ready-Set-Sew Getting Started Guide Congratulations on the purchase of your new sewing machine. We’ve compiled a few tips that will help you get the most out of your new purchase and increase your enjoyment of sewing. Note: Your machine may vary from these illustrations. Always refer to your instruction manual for exact details on your machine. Bobbin Winding In order to ensure correct bobbin winding, follow the below diagram for correct threading.
PAGE 2
Getting Started Guide USING THE NEEDLE THREADER 1 Raise the needle to its highest position. Pull down the needle threader knob as far as it will go. Using the Needle Threader Guide Hook Raise the needle to its highest position. Pull down the needle threader knob as far as it will go. Turn the USING THE NEEDLE THREADER Turn the knob in the direction of knob in the direction of the arrow in the second illustration, then insert the Hook into the 2 needle the arrow eye.
PAGE 3
Common Sewing Situations Sewing Over Thick Fabrics Machine or Needle is Jammed Even though sewing machines can handle all types of fabrics, it’s important to keep in mind that when sewing on thick fabrics like denim, that seams can become very thick. It is important to keep the presser foot level when sewing over these seams or uneven surfaces.
PAGE 4
Troubleshooting Tips Top Tips Always turn the handwheel towards you Skipped / Bad Stitching • • Rethread the machine with the presser foot raised and the take up lever in the highest position. Follow the threading guides and check that the thread is in the take up lever. • Check that the needle is inserted correctly, flat side to the back. • Check that the needle is not bent or blunt and is the correct type of needle.