Use and Care Manual

14
q
z
x
NOTE:
The needle threader can be used with a #11 to #16
needle or a blue tipped needle. Thread sizes 50 to 90
are recommended.
Needle Threader
CAUTION:
Tu rn OFF the power switch when using the needle
threader.
c v
z Lower the presser foot. Raise the needle to its highest
position. Pull down the needle threader knob q as far
as it will go.
q Knob
x Tu rn the knob away from you so the hook comes out
through the needle eye.
Draw the thread around the guide w and under the
hook e.
w Guide
e Hook
e
c Tu rn the knob toward you to pull the thread through
the needle eye.
Raise the knob in the direction of the arrow, drawing
the thread loop through the needle.
v Pull the thread through the needle eye.
w