Use and Care Manual

34
q
ew
Blind Hemming
q Stitch pattern: 15
w Thread tension dial: 1 to 4
e Presser foot: Zigzag foot A
z Fold a hem with the wrong side of the fabric up to
form a 1/4˝ – 7/16˝ (0.4 – 0.7 cm) allowance.
q Wrong side of fabric
w 1/4˝ – 7/16˝ (0.4 – 0.7 cm)
(1) On heavyweight fabrics that tend to ravel, the raw
edge should be overcast first.
(2) Fold the hem under the fabric for lightweight
fabrics.
q
w
(2)
z
q
w
(1)
x
c
x Position the fabric, so that the needle at its leftmost
position just pierces the edge of the fold.
e When the needle comes to the left
r When the needle comes to the right
c Open the fabric after sewing is finished.
NOTE:
If the needle pierces too far left, the stitch will show
through on the right side of the fabric.
e
r