Manualshelf

Operation Manual

ManualsBrandsJanome ManualsMiscellaneousDC2012
41424344454647484950
42
Serging Stitch
Machine setting
q Pattern
w LED display
e Foot C: Overedge foot
qw e
CAUTION:
Do not set the stitch width less than 5 when using
the overedge foot to prevent the needle from
hitting the wires on the foot.
This stitch is used for finishing the raw edges of
stretch fabrics that tend to unravel.
qw e
This stitch is recommended for finishing the edge of
knit fabrics.
Sew along the fabric edge leaving an extra seam
allowance. After you finished sewing, trim seam
allowance close to the stitches.
Knit Stitch
Machine setting
q Pattern
w LED display
e Foot A: Zigzag foot