Operation Manual

68
Appliqué
Machine setting
q Pattern
w LED display
e Foot F: Satin stitch foot
qwe
qwe
qwe
Patchwork
Machine setting
q Pattern
w LED display
e Foot F: Satin stitch foot
Scallop Stitch
Machine setting
q Pattern
w LED display
e Foot A: Zigzag foot
Baste or glue applique pieces on the fabric.
Stitch around the applique making sure the needle
falls along the outer edge of the applique.
When turning corners, lower the needle down into the
outer edge of the appliqué, and raise the presser foot
to pivot the fabric.
Sew on the right side of fabric along the edge leaving
a 1 cm (3/8”) seam allowance.
After sewing, trim the seam allowance close to the
stitching taking care not to cut the thread.
Seam two layers of the fabric with right side together.
Open the fabric flat and sew the pattern over the
seam line on the right side of the fabric.