Operation Manual

72
Quilting
Machine setting
q Pattern
w LED display
e Foot A: Zigzag foot
r Quilting bar
qwe
r
q
w
e
r
Loosen the quilting bar screw on the back of the foot
holder and insert the quilting bar into the hole. Set the
quilting bar at the desired position and tighten the
screw to secure it.
Sew tracing the previous seam with the quilting bar to
keep constant seam spacing.
q Quilting bar screw
w Hole
e Quilting bar
r Seam spacing
Patchwork piecing
Machine setting
q Pattern
w LED display
e Foot O: 1/4” seam foot
qwe
Place the patchwork pieses right sides together. Sew
while guiding the edge of the fabric along the guide on
the foot keeping a precise 1/4” seam allowance.
q Guide
w Right sides of the fabric