Operation Manual

17
Winding the bobbin
Pass the thread through the guide on the
thread guide bar from behind.
1 Thread Guide Bar
Pass the thread under the bobbin winding
tension disk.
2 Bobbin Winding Tension Disk
Thread through the hole in the bobbin from the
inside to the outside.
3 Bobbin Winder Spindle
Put the bobbin on the bobbin winder spindle.
Push the bobbin winder stopper to the left.
4 Bobbin Winder Stopper
NOTE:
When the bobbin winding button is pushed
without pushing the bobbin winder stopper to
the left, the following screen is displayed.
Hold the free end of the thread in your hand
and press the bobbin winding button.
Press the bobbin winding button again to stop
the bobbin when it has wound several layers,
and cut the thread close to the hole in the
bobbin.
5 Bobbin Winding Button
Press the bobbin winding button again. When
the bobbin is fully wound, the machine will stop
automatically.
Automatically return the bobbin winder stopper
to its original position, and cut the thread.
6 Thread cutter
1
5
4
3
2
6
z
x
z
x
c
v
c
v
b
n
b
n