Operation Manual

36
Machine Setting
Pattern: D1
Thread tension:2-6
Presser foot: Dual Feed foot AD
Foot pressure: 3
Dual Feed adjusting dial: 0
Patterns D1, D2, D3, D4 (mode 1) and D01, D02, D03,
D04 (mode 2) can be used with the Dual Feed foot.
Dual Feed adjusting dial
(A) If the lower layer puckers, turn the Dual Feed adjusting
dial toward “+”.
(B) If the upper layer puckers, turn the Dual Feed adjusting
dial toward “–”.
1 Upper layer
2 Lower layer
3 Dual Feed adjusting dial
3
(A)
(B)
1
2
1
2
The Dual Feed foot is extremely effective for sewing with
hard to feed materials such as viynl or leather. It also
eliminates
layer slippage.
NOTE:
See page 13 for how to attach the Dual Feed foot and to
engage the Dual Feed device.
To sew
Raise the presser foot and position the fabric next to a
seam guide line on the needle plate. Lower the needle to
the point where you wish to start.
Pull the needle and bobbin threads toward the rear.
Lower the presser foot.
Depress the foot control to start sewing. Gently guide the
fabric along the seam guide line letting the fabric feed
naturally.
Straight Stitch (Dual Feed: AD)